Focal Point Seem 2 LED Indirect FSM2IS Installation guide

Brand: Focal Point

Model: Seem 2 LED Indirect FSM2IS

Type: Installation guide

IS0751 REV. B ©2020 Focal Point, LLC | 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com/reference 1 of 3

Seem® 2 Indirect

Suspended | FSM2IS

• Congurationsarerunspecic,

pleaseconsultfactorydrawings

beforebeginninginstallation.

• Luminaires must be installed by a qualied

electrician (check with local and national

codes for proper installation).

• To prevent electrical shock, disconnect

electrical supply before installation or

servicing.

• Contractor is responsible for adequately

reinforcing walls and/or ceilings to support

xture weight.

• Focal Point, LLC accepts no responsibility

for inadequately reinforced walls and/or

ceilings.

• The information contained in this drawing

is the sole property of Focal Point, LLC.

Any reproduction in part or whole without

the written permission of Focal Point, LLC

is prohibited.

POWER OFF

POWER ON

ATTENTION

SEE ADDITIONAL

INSTRUCTIONS

BEFORE YOU BEGIN COMPONENT KEY

INSTRUCTION KEY

FOCAL POINT SHIPPED INSTALLED

BAGGED HARDWARE (PATTERNS)

U - Individual

S - Start of Run

I - Intermediate

E - End of Run

Joiner A

(A44446-01)

Gripper Plate

(A51046-02)

Pattern Filler Bracket

(A54600-01)

Joiner B

(A52816-01 & A52804-01)

Joiner Screw

(72026) x2

#6 x 1/4" Pan Head Screw

INDIRECT ASYMMETRIC OPTIC

INDIVIDUAL INSTALLATIONS

FOLLOW STEPS 1-3 & 11

PATTERN INSTALLATIONS

SEE PAGE 3

Wall Asymmetric

Distribution Direction

Power Feed

Power

Feed

Asymmetric Distribution Direction

Asymmetric Distribution Direction

1 of 3

IS0751 REV. C

©2022 Focal Point, LLC | 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com/reference

IS0751 REV. B ©2020 Focal Point, LLC | 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com/reference 2 of 3

6

11

5

7

9

Center gripper plate between luminaires

4

10

8

32

Avoid all contact with LED surface,

LEDs are easily damaged!

FOLLOW FOCAL POINT

INSTRUCTIONS FOR UNIVERSAL

SUSPENSION SYSTEM ASSEMBLY.

SEE IS0166

1

2 of 3

IS0751 REV. C ©2022 Focal Point, LLC | 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com/reference

IS0751 REV. B ©2020 Focal Point, LLC | 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com/reference 3 of 3

PATTERN INSTALLATION

3

2

5

4

1

TO JOIN UNITS

FOLLOW STEPS 3 THRU 6

(PAGE 2)

DRIVER SERVICE

1

Install pattern ller bracket to avoid risk of

electrical shock.

Pattern Filler Bracket

(A54600-01)

Join units, Steps 3 thru 6 (Page 2).

Join units, Steps 3

thru 6 (Page 2).

3 of 3

IS0751 REV. C ©2022 Focal Point, LLC | 4141 S. Pulaski Rd., Chicago, IL 60632 | www.focalpointlights.com/reference

1
2
3

Focal Point Seem 2 LED Indirect FSM2IS Installation guide

Brand: Focal Point

Model: Seem 2 LED Indirect FSM2IS

Type: Installation guide

Download PDF

Related papers