ABB 2117 U-500 Operating instructions

Brand: ABB

Model: 2117 U-500

Type: Operating instructions

This manual is also suitable for

1473-1-7978 │ │ 14.06.2012

DALI potentiometer for broadcast operation

Pos: 2 /#Neustruktur#/ Modul-Struktur /Online-Dokumentati on/Titelblätter/ Dimmer/Titelbla tt - 2117 U @ 23\mod_13361231 92553_15.docx @ 208974 @ @ 1

DALI potentiometer for

broadcast operation

Insert 2117 U-500

Insert 2117/11 U-500

=== Ende der Liste für Textmarke Co ver ===

DALI potentiometer for broadcast

operation

| 1473-1-7978 — 2 —

Pos: 4 /#Neustruktur#/ Modul-Struktur /Online-Dokumentati on/Inhaltsverzei chnis (--> Für alle Dokumente <--)/Inhaltsverzeichnis @ 19\mod_132064904 4386_15.docx @ 109653 @ @ 1

1 Safety ....................................................................................................................................................................... 3

2 Intended use ............................................................................................................................................................ 3

3 Environment ............................................................................................................................................................. 3

4 Operation ................................................................................................................................................................. 4

4.1 Dimming speed ....................................................................................................................................... 4

4.2 Adjusting the basic brightness ................................................................................................................ 4

4.3 Deleting the basic brightness .................................................................................................................. 5

4.4 Activation with memory function .............................................................................................................. 5

4.5 Changing the switch-on brightness ......................................................................................................... 5

4.6 Deleting the switch-on brightness ........................................................................................................... 6

4.7 Adjusting the colour of the light for orientation ........................................................................................ 6

4.8 Changing the power-on level (optional setting): ...................................................................................... 7

4.9 Operation at several control points ......................................................................................................... 7

5 Technical data.......................................................................................................................................................... 8

6 Setup and function ................................................................................................................................................... 9

6.1 Features of function and equipment ........................................................................................................ 9

6.2 Possible combinations ............................................................................................................................ 9

7 Installation and electrical connection ..................................................................................................................... 10

7.1 Requirements for the electrician ........................................................................................................... 10

7.2 Mounting ............................................................................................................................................... 11

7.3 Inserting optical fibres ........................................................................................................................... 11

7.4 Electrical connection ............................................................................................................................. 12

=== Ende der Liste für Textmarke TOC ===

DALI potentiometer for broadcast

operation

Safety

| 1473-1-7978 — 3 —

Pos: 6 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/1. Ebene/S - T/Sicherheit @ 18\mod_130261 2791790_15.doc x @ 103357 @ 1 @ 1

1 Safety

Pos: 7 /#Neustruktur#/ Online-Dokument ation/Sicherhei tshinweise und Hinweise (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - 230 V @ 18\mod_1302606816750_15.docx @ 103308 @ @ 1

Warnin

Electric voltage!

Risk of death and fire due to electrical voltage of 230 V.

– Work on the 230V supply system may only be performed by authorised electricians!

– Disconnect the mains power supply prior to installation and/or disassembly!

Pos: 8 /#Neustruktur#/ Online-Dokument ation/Sicherhei tshinweise und Hinweise (--> Für alle Dokumente <--)/Allgemeine Hinweise/Hinweis - Basisorientiert-Kein SELV -- 2117 @ 21\mod_1331202989918_15.d ocx @ 201957 @ @ 1

Hint

DALI potentiometer 2117 U-500 and 2117/11 U-500 have basic insulation (no SELV).

Pos: 9 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Bestimmungsgemäßer Gebrauch @ 18\mod_130276332 1316_15.docx @ 103483 @ 1 @ 1

2 Intended use

Pos: 10 /#Neustruktur #/Modul-Struktur /Online-Dokumenta tion/Bestimmungsge mäßer Gebrauch/Dimmer /Bestimmungsgemae sser Gebrauch - 2117 @ 21\mod_13312 02666263_15.doc x @ 201942 @ @ 1

DALI potentiometer 2117 U-500 and 2117/11 U-500 are used for light control in connection with DALI operating

devices according to IEC 62386, e.g., DALI electronic ballast units. No other DALI controllers must be combined

with DALI potentiometer 2117 U-500 and 2117/11 U-500.

Pos: 11.1 /#Neustrukt ur#/Modul-Strukt ur/Online-Dokumen tation/Überschr iften (--> Für alle Dokume nte <--)/1. Ebene/ U - Z/Umwelt @ 18\mod_1302614158 967_15.docx @ 103383 @ 1 @ 1

3 Environment

Pos: 11.2 /#Neustrukt ur#/Online-Dokumen tation/Sicher heitshinweise und Hin weise (--> Für alle Dokumente <--)/Hinweise/Hinweis - Umwelt - Hinweis Elektrogeräte @ 18\mod_1302763973434_15.docx @ 103500 @ @ 1

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with domestic waste.

– The device contains valuable raw materials which can be recycled. Therefore, dispose of the

device at the appropriate collecting depot.

Pos: 11.3 /#Neustrukt ur#/Online-Dokumen tation/Sicher heitshinweise und Hin weise (--> Für alle Dokumente <--)/Hinweise/Hinweis - Umwelt - Entsorgung Elektrogeräte @ 20\mod_13257606 95972_15.docx @ 136583 @ @ 1

All packaging materials and devices bear the markings and test seals for proper disposal. Always dispose of the

packaging material and electric devices and their components via the authorized collecting depots and disposal

companies.

The products meet the legal requirements, in particular the laws governing electronic and electrical devices and

the REACH ordinance.

(EU Directive 2002/96/EC WEEE and 2002/95/EC RoHS)

(EU REACH ordinance and law for the implementation of the ordinance (EC) No.1907/2006)

Pos: 12 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruc h ++++++++++++ @ 9\mod_1268 898668093_0.docx @ 52149 @ @ 1

DALI potentiometer for broadcast

operation

Operation

| 1473-1-7978 — 4 —

Pos: 13 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Bedienung @ 11\mod_1279185541 649_15.docx @ 83043 @ 1 @ 1

4 Operation

Pos: 14 /#Neustruktur #/Modul-Struktur /Online-Dokumenta tion/Bedienung/Di mmer/Bedienung - 2117 @ 21\ mod_1331210626890_15. docx @ 202059 @ 222222222 @ 1

4.1 Dimming speed

Fig. 1:

Slow rotation of the control element:

- Fine setting with up to 254 brightness levels.

Fig. 2:

Fast rotation of the control element:

- Large brightness changes in order to reach the desired setting quickly.

4.2 Adjusting the basic brightness

Fig. 3:

Turn the control element slowly to adjust the basic brightness.

1. Switch the lighting on.

2. Adjust the brightness.

3. Press the control element for 10 seconds.

- The load flashes once after the setting has been made.

10 Sec.

DALI potentiometer for broadcast

operation

Operation

| 1473-1-7978 — 5 —

4.3 Deleting the basic brightness

Fig. 4:

Turn the control element slowly to delete the basic brightness.

1. Switch the lighting off.

2. Press the control element for 10 seconds.

- The load flashes once after the setting has been made.

4.4 Activation with memory function

At the factory, the DALI potentiometers are set to always switch on the illumination using the last brightness set

(memory function). The manual adjustment of the switch-on brightness overwrites this function.

4.5 Changing the switch-on brightness

Fig. 5:

To adjust a fixed switch-on brightness carry out the following steps:

1. Switch the lighting on.

2. Adjust the brightness.

3. Double click fast on the control element.

- The load flashes twice after the setting has been made.

The defined brightness overwrites the memory function (activation with the last brightness before deactivation).

Hint

If the illumination switches off after the double-click, the interval between the first and second button

operation was too long.

10 Sec.

OFF

2x Click

DALI potentiometer for broadcast

operation

Operation

| 1473-1-7978 — 6 —

4.6 Deleting the switch-on brightness

Fig. 6:

To delete a fixed switch-on brightness carry out the following steps:

1. Switch the lighting on.

2. Double click fast on the control element.

- The load flashes twice after the setting has been made.

After the deletion of the switch-on brightness, the memory function continues to work (activation with the last

brightness before deactivation).

4.7 Adjusting the colour of the light for orientation

Fig. 7:

To change the colour of the light for orientation carry out the following steps:

1. Switch the lighting (load) off.

2. Press the control element, keep it pressed and turn it quickly back and forth three times.

3. Release the control element.

- The light for orientation flashes 3 times.

4. Select the colour of the LED by turning the control element.

5. Confirm the selection of the colour with a brief press of the control element.

- When the setting has been made the orientation light flashes 3 times.

OFF

2x Click

OFF

Press

Click

DALI potentiometer for broadcast

operation

Operation

| 1473-1-7978 — 7 —

4.8 Changing the power-on level (optional setting):

Fig. 8:

Changing the power-on level (switch-on brightness after mains power failure) effects a uniform brightness or

deactivation of all connected operating devices with the last set brightness value before the power failure.

To change the power-on level carry out the following steps:

1. Switch the lighting (load) off.

2. Press the control element, keep it pressed and turn it quickly back and forth three times.

3. Release the control element.

- The light for orientation flashes 3 times.

4. Press the control element for 10 seconds.

- After the setting has been made the lighting (load) flashes once and the light for orientation 3 times.

When the mains voltage returns, the DALI control unit now switches on at the last brightness set.

4.9 Operation at several control points

The DALI control units can be operated from several control points. In the process, the brightness of the last

operated potentiometer is always assumed first. This also applies to all other settings, such as basic brightness

and memory function.

The colour of the light for orientation must be selected individual for each DALI potentiometer in a system.

Pos: 15 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruc h ++++++++++++ @ 9\mod_1268 898668093_0.docx @ 52149 @ @ 1

OFF

Press

10 Sek.

DALI potentiometer for broadcast

operation

Technical data

| 1473-1-7978 — 8 —

Pos: 16 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/1. Ebene/S - T/Technische Daten @ 11\ mod_1279185386320_15.d ocx @ 83019 @ 1 @ 1

5 Technical data

Pos: 17 /#Neustruktur #/Modul-Struktur /Online-Dokumenta tion/Technische Dat en/Dimmer/Technisc he Daten - 2117 @ 21\mod_133120 3423023_15.doc x @ 201983 @ @ 1

2117 U-500

Nominal voltage:

(via an external DALI power supply)

9.5 – 22.5 V

Power consumption:

(dependent on the colour of the orientation illumination)

7 – 15 mA

Protective circuit electronic

Maximum connectable DALI operating devices:

(dependent on an external power supply)

Operating temperature: 0° C – +35° C

Protective class: IP20

Maximum cable length in the system: 300 m

Number of colours of the light for orientation: 18 + Off

2117/11 U-500

Nominal voltage: 230 V~ ±10%, 50 / 60 Hz

Power consumption: 7 – 15 mA

Open circuit voltage, output voltage: 15.5 V

Maximum drawn current: 75 mA

Protective circuit electronic

Maximum connectable DALI operating devices: 37

Operating temperature: 0° C – +35° C

Protective class: IP20

Maximum cable length in the system: 300 m

Number of colours of the light for orientation: 18 + Off

Pos: 18 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruc h ++++++++++++ @ 9\mod_1268 898668093_0.docx @ 52149 @ @ 1

DALI potentiometer for broadcast

operation

Setup and function

| 1473-1-7978 — 9 —

Pos: 19 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/1. Ebene/A - F/Aufbau und Funktion @ 11\ mod_1279185435352_15. docx @ 83027 @ 1 @ 1

6 Setup and function

Pos: 20 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/2. Ebene/A - F/Funktions- und Ausst attungsmerkmale @ 23\mod_1 336557630140_15.d ocx @ 209136 @ 2 @ 1

6.1 Features of function and equipment

Pos: 21 /#Neustruktur #/Online-Dokumen tation/Aufbau und Funkti on/Dimmer/Funkti onen - 2117 @ 21\mod_13312051 01538_15.docx @ 201999 @ @ 1

DALI potentiometer 2117 U-500 and 2117/11 U-500 are used to control the brightness of connected DALI

operating devices (e.g., DALI electronic ballast units, DALI LED modules, etc).

They operate in broadcast mode (uniform actuation of all DALI control units in the system).

For DALI potentiometer 2117 U-500 an additional external DALI power supply is required. Device 2117/11 U-500

has its own power supply.

Pos: 22 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/2. Ebene/G - L/Kombinationsmögli chkeiten @ 19\mod_1320312 769153_15.doc x @ 109520 @ 2 @ 1

6.2 Possible combinations

Pos: 23 /#Neustruktur #/Modul-Struktur /Online-Dokumenta tion/Kombinations möglichkeiten/Di mmer/Kombinations möglichkeiten - 2117 @ 23\ mod_1336994253800_15. docx @ 209443 @ @ 1

2117 U

2117/11 U

2115-21x

X X

6540-xxx

X X

6540-8xx-102

X X

Pos: 24 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1

DALI potentiometer for broadcast

operation

Installation and electrical

connection

| 1473-1-7978 — 10 —

Pos: 25 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/1. Ebene/M - O/Montage und elektrisc her Anschluss @ 23\mod_1336477 157864_15.doc x @ 209033 @ 1 @ 1

7 Installation and electrical connection

Pos: 26 /#Neustruktur #/Online-Dokumen tation/Sicherhei tshinweise und Hinweis e (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - Niederspannungs- und 230 V-Leitungen @ 23\mod_133 6558868201_15.doc x @ 209164 @ @ 1

Warnin

Electric voltage!

Risk of death due to electrical voltage of 230 V during short-circuit in the low-voltage line.

- Low-voltage and 230 V lines must not be installed together in a flush-mounted socket!

Pos: 27 /#Neustruktur #/Online-Dokumen tation/Sicherhei tshinweise und Hinweis e (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - Vorgeschaltete Sicherung abschalten @ 20\mod_132644171146 7_15.docx @ 137043 @ @ 1

Warnin

Electric voltage!

The upstream fuse must be disconnected when working on the lighting system.

Pos: 28 /#Neustruktur #/Online-Dokumen tation/Sicherhei tshinweise und Hinweis e (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - Fachkenntnisse @ 23\mod_1336559183027_15.docx @ 209179 @ 2 @ 1

7.1 Requirements for the electrician

Warnin

Electric voltage!

Install the device only if you have the necessary electrical engineering knowledge and experience.

• Incorrect installation endangers your life and that of the user of the electrical system.

• Incorrect installation can cause serious damage to property, e.g. due to fire.

The minimum necessary expert knowledge and requirements for the installation are as follows:

• Apply the "five safety rules" (DIN VDE 0105, EN 50110):

1. Disconnect from power;

2. Secure against being re-connected;

3. Ensure there is no voltage;

4. Connect to earth and short-circuit;

5. Cover or barricade adjacent live parts.

• Use suitable personal protective clothing.

• Use only suitable tools and measuring devices.

• Check the supply network type (TN system, IT system, TT system) to secure the following

power supply conditions (classic connection to ground, protective earthing, necessary

additional measures, etc.).

Pos: 29 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruc h ++++++++++++ @ 9\mod_1268 898668093_0.docx @ 52149 @ @ 1

DALI potentiometer for broadcast

operation

Installation and electrical

connection

| 1473-1-7978 — 11 —

Pos: 30 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/2. Ebene/M - O/Montage @ 18\mod_1302615960 458_15.docx @ 103424 @ 2 @ 1

7.2 Mounting

Pos: 31 /#Neustruktur #/Online-Dokumen tation/Sicherhei tshinweise und Hinweis e (--> Für alle Dokumente <--)/Warnhinweise/Sicherheit - 230 V @ 18\mod_1302606816750_1 5.docx @ 103308 @ @ 1

Warnin

Electric voltage!

Risk of death and fire due to electrical voltage of 230 V.

– Work on the 230V supply system may only be performed by authorised electricians!

– Disconnect the mains power supply prior to installation and/or disassembly!

Pos: 32 /#Neustruktur #/Modul-Struktur /Online-Dokumenta tion/Montage/al le Geräte/Montage - UP-Dose n - DIN 49073-1 @ 21\mod_13312 10080219_15.doc x @ 202029 @ @ 1

The device must only be installed in suitable flush-mounted sockets (DIN 49073-1).

Pos: 33 /#Neustruktur #/Modul-Struktur /Online-Dokumenta tion/Montage/Di mmer/Montage - 2117 @ 21\mod_1331 210177831_15.doc x @ 202044 @ 2 @ 1

7.3 Inserting optical fibres

Fig. 9:

Insert the optical fibre directly into the two middle openings between the connecting terminals. In the process,

align the plastic lug in the direction of the potentiometer axis.

Hint

• The glow lamps included with the control elements must not be used.

• The control elements of the impuls series are not suitable for illumination!

Pos: 34 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruc h ++++++++++++ @ 9\mod_1268 898668093_0.docx @ 52149 @ @ 1

! top

3855

3856

Art.

DALI potentiometer for broadcast

operation

Installation and electrical

connection

| 1473-1-7978 — 12 —

Pos: 35 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Überschriften (--> Für alle Dokumente <--)/2. Ebene/A - F/Elektrischer Anschlu ss @ 21\mod_1328177051724 _15.docx @ 138042 @ 2 @ 1

7.4 Electrical connection

Pos: 36 /#Neustruktur #/Modul-Struktur /Online-Dokumen tation/Anschluss/Di mmer/Anschluss - 2117 @ 21\mod_1331205283908 _15.docx @ 202014 @ @ 1

Fig. 10:

No. Function

1 DALI power supply

2 2 DALI operating device

3 2117 U-500

DALI potentiometer for broadcast

operation

Installation and electrical

connection

| 1473-1-7978 — 13 —

Fig. 11:

No. Function

1 DALI operating device

2 2117/11 U-500

Notes

● If the DALI potentiometer 2117/11 U-500, is used in installations with an existing DALI power

supply, the terminals L and N must not be assigned. The device is then supplied with current

directly from the bus.

● Up to 3 DALI potentiometers 2117/11 U-500 and 5 DALI potentiometers 2117 U-500 can be

operated in parallel. In the process, observe the maximum permissible power consumption.

● When DALI operating devices, e.g. electronic ballasts, are connected, the specifications of the

respective manufacturer must be observed.

● The DALI control line and mains line may lie together in one NYM cable.

● Polyphase operation is permissible.

=== Ende der Liste für Textmarke Content ===

DALI potentiometer for broadcast

operation

1473-1-7978 | | 14.06.2012

Pos: 38 /#Neustruktur#/Modul-Struktur/Online-Dokumentation/Rückseiten (--> Für alle Dokumente <--)/Rückseite - Busch-Jaeger - Allgemein @ 20\mod_1327320074886_1 5.docx @ 137103 @ @ 1

member of the ABB Group

Busch-Jaeger Elektro GmbH

PO box

58505 Lüdenscheid

Freisenbergstraße 2

58513 Lüdenscheid

Germany

www.BUSCH-JAEGER.com

[email protected]bb.com

Central sales service:

Phone: +49 (0) 180 5 669900

Fax: +49 (0) 180 5 669909