2. Wren Kitchens
  3. 575 Lift Mechanism Replacement Frontal

Wren Kitchens 575 Lift Mechanism Replacement Frontal Assembly Guide

  • Hello! I am an AI chatbot trained to assist you with the Wren Kitchens 575 Lift Mechanism Replacement Frontal Assembly Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
For Internal Use: FI.WR.INS.081_WKIN00071_575_LIFT_ReplaceFRTL Rev2
FRONTALS
575 Lift Mechanism Replacement Frontal Guide
Step 1.
Line up and insert the mechanism pins into holes
provided.
Step 2.
Tighten 3 x screws on each lift hinge into the unit. These are
already positioned within the mechanism.
Measure from
Top - Front
edge of unit
View from inside of unit
top of left hand end panel
End panel mechanism pin hole locations
Mechanism pins
575 Lift
mechanism
View from inside of unit
3 x mechanism
screws
Hinge bracket
Step 3.
Screw the provided 4 x 15mm screws into each hinge
bracket as shown.
Hinge bracket xing
locations
Page 2
FRONTALS
575 Lift Mechanism Replacement Frontal Guide
Please refer to lift hinge instructions provided or visit
website: hafele.com/external/free for further frontal
adjustment information if required
Step 5.
Once the frontal has been adjusted, place
plastic covers over the lift hinges.
Step 4.
Attach the frontals to unit, clip hinge brackets
onto hinge mechanism arm and click to secure.
/