LAMONA LAM8606 Installation guide

LAMONA
Brand
LAMONA
Model
LAM8606
Category
Dishwashers
Type
Installation guide
LAM8606
Installation Instructions
Dishwasher
(To be used in conjunction with User Instructions)
l
Please read these Installation Instructions to ensure safe,
correctttingofthisappliance.
l
Thedishwashershouldbettedbyasuitablycompetent,
qualiedperson.
l
Pleasekeeptheseinstructionsinasafeplaceforfuturereference.
l
Dangerofsuffocationkeeppackagingmaterialawayfromchildren.
Warningforhazardous
situationswithregardto
lifeandproperty.
Warningfor
electricshock.
Warningfor
riskofre.
Throughoutthismanualthe
followingsymbolsareused.
2
www.howdens.com
Riskofdamageto
appliance:
Donotattemptto
movetheappliance
bythedoor.
NOTE:Donotleavethe
dishwasherdooropen.
Becarefulnottotrip
overopendoor.
Warning:
Be aware of the
instabilityofthe
appliancepriortobeing
ttedintoposition.
Riskofdamageto
property:
Takecareofsurrounding
areawhenmovingthe
appliancetoprevent
damagetoooring,wall
coverings,pipesetc..
Twopersonlift. Riskofinjury:
Bewareofsharpmetal
edges.Usegloveswhen
handling.
NOTE:Iftheelectricity
cableisdamagedit
mustbereplacedbya
competentperson.
Dishwashermust
bexedsecurelyand
level.
Ensurethatallpacking
andtransitprotectors
havebeenremoved
fromtheappliance
beforepositioning.
Thisapplianceisnot
designedforstacking
withotherappliances.
Installation
Safety Information
Fitting guide
1. Dimensions......................................................p.4
2. Dishwasherconnections....................................p.4
3. Fitfeetandraise10mmbelow
worktopheight.....................................................p.6
4. Locatesecuringbrackets...................................p.6
5. Protectionstripfortimberworktops..................p.7
6. Positioningthedishwasher.................................p.7
7. Adjust feet and raise dishwasher to
undersideofworktop(level)...............................p.8
8. Remove‘H’frame................................................p.8
9. Standarddecordoorpreparation......................p.9
10. Decordrawerfrontalspreparation....................p.9
11. Fit decor door / decor drawer frontals..............p.10
12.Finaladjustmentandsecuredishwasher.........p.11
13.Fitplinth................................................................p.12
14. Connectwater/plumbing/electric......................p.12
3
www.howdens.com
B(4x43mm)x1 C(4x36mm)x1
A(3.5x14)x1x1
x4
+50mm
DO NOTusehigh
speedimpact
powertools.
24mmopen
endedspanner
T20,atand
cross head
screwdrivers
Copyright©2018HowdenJoineryLtd.Allrightsreserved.
Parts supplied
Tools required
4
www.howdens.com
min
15mm
818mm
(+100)
550mm
598mm
820-920mm
min
570mm
600mm(+1)
min
500mm
min
300mm
max
1000mm
max.
100mm
min
500mm
min
300mm
max
1000mm
1 - Dimensions
*
Ensuretheoorislevelandstrongenough
tosupportafullyloadeddishwasher.
2 - Dishwasher connections
Position the dishwasher
relativetoserviceconnections.
Alldimensionsaretotheoor. DO NOT insertthehosetoodeepintothewastepipe,
(Maximum hose length, 3.5 metres).
5
www.howdens.com
Cold water supply
10-80 lpm.
REMOVE
CAP/END
WARNING!Thisappliance
mustbeearthed.
(Socket must be accessible
after tting).
WARNING!Donotuseextension
cables/adapters.
Ensure water is turned on and
theisolatorvalveis accessible
after tting.
Hoseconnection-3/4”.
Coldwaterpressure-
0.1–1Mpa(0.3-1.0Bar)
Incorrectwastepipeconguration. Correctwastepipeconguration.
Ensurecap/endisremovedfrom
wastepipespigot.
NOTE: Ensure hoses are not
kinked or trapped behind the
dishwasher.
NOTE: Ifnecessaryloosenand
rotate the water hose towards
thewatersupplyandre-tighten.
(Always use the new hose
supplied with the dish er).
6
www.howdens.com
DO NOTusehighspeed
impactpowertools.
DO NOTdamagethe
plasticscrewheads.
+
Flat head
screwdriver
_
+
_
Plus foot
addition
+50mm
Foot,
max
50mm
10-15mm
For standard installation
extensionfeetneedto
betted.
3 - Fit feet and raise to 10-15mm below worktop height
Front feet Rear feet
Insertbracketsandfold.
4 - Locate securing brackets
Do not position
in cabinet run at
thisstage.
7
www.howdens.com
+
5 - Protection strip for timber worktops to avoid condensation damage
6 - Positioning the dishwasher
NOTE: Ensure hoses are
not kinked or trapped
behind the dishwasher.
NOTE: Ifnecessaryloosen
and rotate the water hose
towardsthewatersupply
andre-tighten.
Alwaysusethenew
hosesuppliedwiththe
dishwasher.
Ensure a clean and
dustfreesurface. Cuttot.
NOTE:Thisstripmustbettedtotimberworktopsto
avoiddamage.Ensureprotectionstripissettoedgeof
squareedgedworktops.
8
www.howdens.com
DO NOTusehighspeed
impactpowertools.
DO NOTdamagethe
plasticscrewheads.
+
_
Cross head
A(3.5x14)x2
+
Flat head
screwdriver
_
LEVEL
7 - Adjust feet and raise dishwasher to underside of worktop (level).
Front feet
Rear feet
8 - Remove ‘H’ frame
Unscrewthetwoscrewsandremove
theplastic‘H’bracket.Retainthe
screws for stage 9/10.
9
www.howdens.com
A(3.5x14)x4
A(3.5x14)x4
60mm
130mm
130mm
=
267mm
2x356mmdrawerfronts=712mm
Normaldoorheight=716mm
Thereforespacebetween
drawer fronts = 3-4mm
TOP
Centre
=
=
=
TOP
Centre line
267mm
517mm
267mm
267mm
517mm
267mm
267mm
9 - Standard decor door preparation
10 - Decor drawer frontals preparation
Secure with the screws
retainedfromstage 8
plustwoadditionalscrews
fromtheaccessorybag.
Secure with the screws
retainedfromstage 8
plustwoadditionalscrews
fromtheaccessorybag.
Removecentrerail.
Fithandle(ifapplicable)atthis
stageandCOUNTER-BORE
SCREWS.
10
www.howdens.com
B(4x43mm)x4(x6)
2mm
2mm
11 - Fit decor door / decor drawer frontals
Fixing for standard decor door.
Removetheexistingxingsandusingthe
43mmscrewssupplied,secureatpositions
2 and 5.Ensurecorrectalignmentwiththe
topofthedoor,(2mmoverlapattop).
DO NOT usehole1,especially
whenttinganintegrated
handle decor door.
1
2
3
4
5
1
2
3
4
5
Fixing for decor drawer
frontals.
Removetheexistingxings
andusingthe43mmscrews
supplied,secureatpositions
2, 3 and 5.Ensurecorrect
alignmentwiththetopofthe
door,(2mmoverlapattop).
DO NOTfullytighten
thescrews.
1
2
3
4
5
1
2
3
4
5
Ifnecessarymakenalalignment
andfullytightenthescrews.Make
surescrewsarefastenedushbut
DO NOTover-tighten.
11
www.howdens.com
A(3.5x14)x4 A(3.5x14)x4
3mm3mm
600mm (+1)
601mm (+<1)
Avoid clash
C(4x36mm)x2
12 - Final adjustment and secure dishwasher
Usingfeetmakenal
adjustmentstoheight
so that the dishwasher
touches the underside
oftheworktop,(side
xing for solid surface
worktops and top xing
for timber worktops).
Securing screws
Maximum600mm(+1)
Solid worktop Timber worktop
Sidexingscrewstocabinets.
(Do not overtighten - Ensure gap is no larger than
601mm to avoid door sealing and leakage issues).
Ifnecessaryre-aligndecordoor/decor
drawerfrontalsbeforenallysecuring.
MAKING SPACE MORE VALUABLE
ProductinformationcorrectatthetimeofpublicationinJune2018.Thecompanyhasapolicyof
continuousproductdevelopmentandreservestherighttochangeanyproductsandspecications
giveninthismanual.SubjecttotheTermsandConditionsofTrading,acopyoftheHowdensJoinery
TermsandConditionsisavailableuponrequest.
HowdenJoineryLtd,FirstFloor,40PortmanSquare,London,W1H6LT.
RegisteredinEngland526923
812110AA
Cold water supply
10-80 lpm.
REMOVE
CAP/END
13 - Fit plinth
14 - Switch on water and electric
Runaprogrammecycletoconrmsuccessfulinstallation
andthattherearenoleaks.
Once decor door / decor drawer
frontalsarettedcorrectly,t
theplinth.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

LAMONA LAM8606 Installation guide

LAMONA
Brand
LAMONA
Model
LAM8606
Category
Dishwashers
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents