2. BLOTZ
  3. B28-RU-009

BLOTZ B28-RU-009 Assembly Instructions

  • Hello! I've reviewed the instructions for the BLOTZ's Ruin B28-RU-009 model. This document guides you through the assembly process, which involves gluing the wall sections together and to a base. It also mentions tools like a modeling knife and sandpaper. I'm ready to answer any questions you have about this model kit.
  • What type of glue is required?
    What tools are needed for assembly?
    Where can I find full-colour instructions?
28mm Ruins #9
B28-RU-009
Please read these instructions fully before starting construction.
PVA or equivalent glue will be required to stick sections together.
Sand paper can be used to gently clean any joints.
A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and remember
to cut away from yourself at all times.
During the construction of this model, you may find it convenient to use pegs / elastic bands to hold pieces in place while
you allow glue to dry.
A full-colour copy of these instructions can be found on our website: www.blotz.co.uk
Ruins #9 (B28-RU-009)
Remove the two tall wall sections from the sprue and
glue them together back to back so that the stonework
lines up.
And do the same with the two short sections.
Glue the walls to the base ensuring they are the right
way round (as shown above).
/