Assembly Instructions
Base/Vanity with 3 Drawers
Wood
Dowel
Cam-Lock
Screw
Cam-Lock
Nut
¾” Screw
Bumpers
Back Panel
1
2
3
4
Tools needed but not provided:
Rubber Mallet
Wood Glue
½” Screw
*Do not put glue directly
on the dowel *Place 2-3
drops of glue in the hole
before inserting each
dowel
Insert dowels
after glue drops
Back Panel
Drawer Front
X 3
Drawer Back
X 3
Drawer Side
X 6
Front Cross
Brace X 3
Back Cross
Brace
4 ½” Toe Kick
Phillips
Screwdriver
Drawer Slides
X 6
Right Panel
*Place 2-3 drops of glue in side
panel holes before attaching Cross
Braces, Toe Kick, Cabinet Bottom
and Back Panel
Left Panel
Backset 1/8”
Cabinet
Bottom
Left
Panel
Right
Panel
*Push all the way in
until less than 3/8” of
dowel is exposed
Left Panel
Right Panel
Cabinet Bottom
Drawer Bottom
X 3
4-1/2” Toe Kick
Front Cross Brace
Front Cross Brace
Back Cross Brace
Cabinet
Bottom
C A B I N E T S
B y M o d e r n C l a s s i c
X 16
*Screw in Cam-Lock Screw until
threads are no longer visible for
both Right and Left Panels
X 12
*Set and screw in 6 Drawer Slides
for both Right and Left Panels