2. Krosswood Doors
  3. PC-WS-SB33

Krosswood Doors PC-WS-SB33 Operating instructions

  • Hello! I've reviewed the assembly instructions for the KROSSWOOD Sink 2 Door cabinet. This document includes guidance on using wood glue, installing dowels, cam lock screws, and hinges, and assembling the cabinet components. I'm ready to answer your questions and help you build your cabinet.
  • Where should glue be placed when using dowels?
    How far should the dowels be pushed in?
    When should hinge screws be fully tightened?
*Place 2-3 drops of glue in holes before
inserting dowels. Attach Front Cross
Braces together with false front blocks
Right Panel
*Place 2-3 drops of glue in side
panel holes before attaching Cross
Braces, Toe Kick, Cabinet Bottom
and Back Panel
Left Panel
Assembly Instructions
Sink 2 Door
Wood
Dowel
Cam-Lock
Screw
Cam-Lock
Nut ¾” Screw Bumpers 2 Piece
Hinge X 4
Back Panel
1 2
3 4
Tools needed but not provided:
Wood Glue
½” Screw
*Do not put glue directly on the dowel
*Place 2-3 drops of glue in the hole
before inserting each dowel
X 4
* Insert dowels
after glue drops
Front Cross
Brace X 2
Back Cross
Brace
4 ½” Toe Kick
Phillips
Screwdriver
*Do not Fully tighten ½”
hinge screws until step 8
X 14
Cabinet
Bottom Left
Panel
Right
Panel
*Push all the way in until less
than 3/8” of dowel is exposed
Left Panel
Right Panel Cabinet Bottom
Door X 2
C A B I N E T S
B y M o d e r n C l a s s i c
X 14
*Screw in Cam-Lock Screw until
threads are no longer visible
False Front
Block X 2
1 1/8”
False Front
Screw X 2
X 28
Screw to mount false front
with 1 1/8” false front screws
5 6
8 9 7
X 14
Tighten all
Cams
Back Panel
4-1/2” Toe Kick
Front Cross Brace
Front Cross Br
Back Cross Brace
Cabinet
Bottom
X 2 Doors
Hinge Adjustment as Needed For Door Alignment
(In/Out)
Side-Side Up-Down Front-Back
10
Center False Front above doors 1/8” down
from top and 1/8” in on each side.
/