Page is loading ...
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
SINK DESCRIPTION
• Manufactured of 20 gauge, type 301 nickel-bearing
stainless steel
• Single bowl is 14" x 16" x 7"
• The sink ledge has three fixture mounting holes,
1-1/2" in diameter located 4" on center
• Has one 3-1/2" diameter recessed drain opening
• Soundshield undercoating maximizes sound
deadening and inhibits condensation
• The exposed surfaces are polished to a lustrous
satin tone finish
• Includes all necessary mounting hardware
CUT OUT DIMENSIONS
• Cut out dimensions are 16-1/2" x 21-1/2", with a 3/4"
corner radius. A tolerance of plus or minus1/16"
is acceptable
STANDARDS
• Third party certified by IAPMO to meet ASME A112.19.3
and all applicable specifications referenced therein.
WARRANTY
• Warranted for ten years against material or
manufacturing defects
Camelot
®
Single Bowl Kitchen Sink
Model: 22231
(K-1722-3-7)
12-1/2"
(318mm)
2-3/4"(70mm)
R. TYP.
4"(102mm)
4"(102mm)
1-1/2"(38mm)
DIA. TYP.
22"(559mm)
LENGTH
17"(432mm)
WIDTH
8-1/2"
(216mm)
14"(356mm)
BOWL
1-1/2"(38mm)
1-1/2"(38mm)
7 "(178mm)
BOWL
DEPTH
16"(406mm)
BOWL
1-1/2"
(38mm)
4-1/2"
(114mm)
3-1/2"(89mm)
DIA.
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
SINK
CLAMP
COUNTERTOP
SEALANT MATERIAL
Installation Detail
Rev. 8/08
/