SINK DESCRIPTION
• Manufactured of 23 gauge,
type 301 nickel-bearing stainless steel
• Comes complete with model #87903
two-handle bar faucet
• Bowl is 12" x 10" x 5-1/2"
• The sink ledge has two fixture mounting holes,
1-1/4" in diameter recessed drain opening
• The exposed surfaces are polished to
a lustrous satin tone finish
• Includes all necessary mounting hardware
CUT OUT DIMENSIONS
• Cut out dimensions are 14-3/8" x 14-3/8",
with a 3/8" corner radius. A tolerance of plus or
minus 1/16" is acceptable
WARRANTY
• Warranted for one year against
material or manufacturing defects
Specifications
MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
CRITICAL DIMENSIONS
(DO NOT SCALE)
Installation Detail
Single Bowl Bar Sink
Model: 21509
15"
(381mm)
15"
(381mm)
11-1/2"
(292mm)
12"
(305mm)
6"
(152mm)
1-1/2"
(38mm)
1-1/2"
(38mm)
5"
(127mm)
10"
(254mm)
4"
(102mm)
1-1/4"
DIA. TYP
2-3/4"
DIA. TYP
2-5/8"
DIA. TYP
2"
(51mm)
3-1/2"
(89mm)
5"
(127mm)
2"
DIA. TYP
1.5°
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
SINK
CLAMP
UNDERCOAT
COUNTERTOP
SEALANT MATERIAL
Rev. 11/01
/
