WamBam Fence VG13007 is a great choice for anyone looking for a durable, low-maintenance fence. Made from premium vinyl, this fence is resistant to fading, chipping, and peeling, and it will never need to be painted or stained. The arched top gate adds a touch of elegance to any property, and the easy-to-follow instructions make installation a breeze. With its superior strength and durability, WamBam Fence VG13007 is the perfect choice for any fencing project.
WamBam Fence VG13007 is a great choice for anyone looking for a durable, low-maintenance fence. Made from premium vinyl, this fence is resistant to fading, chipping, and peeling, and it will never need to be painted or stained. The arched top gate adds a touch of elegance to any property, and the easy-to-follow instructions make installation a breeze. With its superior strength and durability, WamBam Fence VG13007 is the perfect choice for any fencing project.
REALLY
Premium Vinyl
Arched Top Gate
Important stuff to know about
installing your WamBam gate.
1-877-778-5733
w ww.w ambamfence.com
Ver 1, July 2011
1
1 - Read Over Fence Instructions First
Your gate and fence will work better together as an
integrated
solution if you rst take the time to read and understand your
fence instructions.
2 -
Do a Dry Run First on the Gate Frame
Only (not pickets or boards)
Please do not glue or screw your gate frame together until you
have rst temporarily assembled the gate. In other words,
do a dry run rst.
This will ensure three things:
a) That you have everything necessary to complete the gate.
b) That you will have assembled the gate in the correct order.
c) All the pieces t and function properly.
It’s easier to trouble shoot when things are not glued and screwed together.
After you assemble your gate correctly, please disassemble as necessary and
use glue and screws to permanently assemble the gate.
3 - Ideally, Install Your Gate Posts
Before Your Fence Posts
Your fence panels will be more forgiving for a custom t than
your gate. Ideally, position and install your gate posts
before you do anything else, or very early on in the
process of setting up your fence run.
Install Your Gate Posts
Before Installing Your
Fence Posts.
Reality Check
Premium Vinyl Arched Top Gate
For more information,
contact us at 1 877-778-5733.
2
For more information, contact us at 1 877-778-5733.
Premium Arched Top Vinyl Gate
4 -
Ideally, Do Not Hang Your Gate System Off a Single
Non-Supported Post.
Your gate will perform better and last longer if your hinge post is connected to a panel of fence which is
connected to another post. The weight strain will be transferred unto two posts versus just one. Installing
fence panels on both sides of your gate is the ideal in all situations. If this is not possible because of space
restrictions, please contact us for alternative solutions to overcome.
Do Not Hang Gate on Lone Soldier Post.
3
Box Contents
Premium Arched Top Vinyl Gate
For more information, contact us at 1 877-778-5733.
Posts Sold Separately
.090in. wall
thickness
Each Gate Box Includes:
• Gate Arch (1)
• Privacy Boards (4)
• Gate Arch Top Bracket (2)
•
Gate Latch (1)
• Vertical Stile (2)
• Gate Bottom Bracket (2)
• Gate Hinges (2)
• Bottom Rail (1)
• Gate Brace (1)
Sold Separately:
• Posts
.050in. wall
thickness
• Tube of Glue (1)
• Stainless Steel Screws (20)
PRODUCT OVERVIEW
For more information, contact us at 1 877-778-5733.
4
Gate InstallationGate Assembly
Premium Arched Top Vinyl Gate
Ground
11.75in.
50.45in.
7.8in.
7.8in.
32.4in.
7.8in.
48in.
3.8in.
62.7in.
3.5in.
70in.
1.5in.
3.5in.
3.5in.
1.5in.
2in.
94in.
73.5in.
72in.
50in.
54.5in.
48in.
A
B
A B
C D
3.5in.
1.5in.
.090in. wall thickness
C
1.5in.
D
3.5in.
Concrete Footing
Posts Sold Separately
2in.
36in.
10in.
For more information, contact us at 1 877-778-5733.
5
Assemble the Gate Frame Bottom & Sides
STEP 1
Detailed Installation Instructions
Premium Arched Top Vinyl Gate
GLUE
Handle with care: vinyl weld
glue takes approximately
five minutes to cure.
Completely assembled gate shown. A - Run bead of vinyl weld continously around
the inside of the gate bracket.
C - Insert the bottom rail until it bottoms
out inside gate bracket.
D - Insert vertical gate stiles. They will
bottom-out against bottom horizontal rail.
C
A
D
B - Insert the bottom rail until it bottoms out inside gate bracket.
B
UNEVEN EVEN
GLUE
GLUE
Did you do a dry run of assembly first?
Please read page 1 of instructions.
For more information, contact us at 1 877-778-5733.
6
Premium Arched Top Vinyl Gate
Insert Boards & Assemble
the Gate Frame Top
STEP 2
Please ensure your
privacy boards fits snug
into the vertical gate stile.
A
A - Insert tongue and groove privacy
board tight into the vertical stile.
B - Privacy boards should bottom-
out inside bottom rail.
C - Insert gate arch fully into bracket.
D - Slide gate arch (with brackets) over the
privacy boards and vertical gate stiles.
C
B
D
GLUE
GLUE
Did you do a dry run of assembly first?
Please read page 1 of instructions.
For more information, contact us at 1 877-778-5733.
7
Fasten Gate Brackets &
Attach Gate Hardware
STEP 3
Premium Arched Top Vinyl Gate
A
A - Ensure your gate is square B - Fasten gate brackets to internal members
using screws
C - Fasten gate hinges onto the gate brackets
with SHORT screws
D - Fasten gate latch onto the gate bracket
with SHORT screws
C
B
D
Hinges must be installed
in these exact locations.
Latch must be installed
in this exact location.
For more information, contact us at 1 877-778-5733.
8
Premium Arched Top Vinyl Gate
Gate Brace Parts
B - Ensure that gate is square, then screw
bracing into place.
A
B
Assemble & Fasten
Gate Brace
STEP 4
Top Bar
Bottom Bar
A - Assemble gate bace
with bolts, washers and
nuts as necessary.
(4)
1.25” (#10)
Screws
(2)
.25” Lock
Washers
(2)
.25” Nuts
(2)
.25” x .75”
Hex Bolts
1
2
3
For more information, contact us at 1 877-778-5733.
9
STEP 5
Premium Arched Top Vinyl Gate
Position, Adjust & Align
Gate/Secure Hinges to Posts
A
A - Use temporary spacers or blocks to rest the gate on during alignment and installation
B - Fasten hinges to posts with LONG screws
Please try to line
up your screws as
per this drawing.
B
10
Level Gate & Adjust Hinges
STEP 6
Premium Arched Top Vinyl Gate
Adjust the spring tension
in gates as necessary.
Use steel insert pin.
A
A - Fasten gate hinges accordingly B -
Check for level, fit and function to latching post
C
B
D
LEVEL
Latch is designed for left and right hand applications.
Temporarily remove the spring, bolt and reverse paddle
portion as necessary.
C -
Hinges can be adjusted moderately
to bring gate into level alignment
with post
11
Align & Install Latch
STEP 7
Premium Arched Top Vinyl Gate
A
A / B - Align and fasten the gate latch catch to fit and function with the gate finger.
B
For more information, contact us at 1 877-778-5733.
Congratulations! You did it!
Go grab a beverage of your choice, admire your
handy work, and show us what you got by entering
our annual photo/video contests!
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
WamBam Fence VG13007 is a great choice for anyone looking for a durable, low-maintenance fence. Made from premium vinyl, this fence is resistant to fading, chipping, and peeling, and it will never need to be painted or stained. The arched top gate adds a touch of elegance to any property, and the easy-to-follow instructions make installation a breeze. With its superior strength and durability, WamBam Fence VG13007 is the perfect choice for any fencing project.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
WamBam Fence VG13007 Operating instructions
-
-
-
-
-
-
-
-
-
Other documents
-
Weatherables WKR-THDV42-S8 User manual
-
Barrette Outdoor Living 73014769 User manual
-
Freedom 73024847 User manual
-
Freedom 73030234 User manual
-
New England Arbors VA68203 User manual
-
Endon 91781 User manual
-
TerraFence 200003-BLK Installation guide
-
Zippity Outdoor Products ZP19028 Installation guide
-
Zippity Outdoor Products ZP19028 Installation guide
-
Zippity Outdoor Products ZP19038 Operating instructions
