WamBam Fence VG13007 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the WamBam Fence VG13007 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
REALLY
Premium Vinyl
Arched Top Gate
Important stuff to know about
installing your WamBam gate.
1-877-778-5733
w ww.w ambamfence.com
Ver 1, February 2017
1
1 - Read Over Fence Instructions First
Your gate and fence will work better together as an
integrated
solution if you rst take the time to read and understand your
fence instructions.
2 -
Do a Dry Run First on the Gate Frame
Only (not pickets or boards)
Please do not glue or screw your gate frame together until you
have rst temporarily assembled the gate. In other words,
do a dry run rst.
This will ensure three things:
a) That you have everything necessary to complete the gate.
b) That you will have assembled the gate in the correct order.
c) All the pieces t and function properly.
Its easier to trouble shoot when things are not glued and screwed together.
After you assemble your gate correctly, please disassemble as necessary and
use glue and screws to permanently assemble the gate.
3 - Ideally, Install Your Gate Posts
Before Your Fence Posts
Your fence panels will be more forgiving for a custom t than
your gate. Ideally, position and install your gate posts
before you do anything else, or very early on in the
process of setting up your fence run.
Install Your Gate Posts
Before Installing Your
Fence Posts.
Reality Check
Premium Vinyl Arched Top Gate
For more information,
contact us at 1 877-778-5733.
2
For more information, contact us at 1 877-778-5733.
Premium Arched Top Vinyl Gate
4 -
Ideally, Do Not Hang Your Gate System Off a Single
Non-Supported Post.
Your gate will perform better and last longer if your hinge post is connected to a panel of fence which is
connected to another post. The weight strain will be transferred unto two posts versus just one. Installing
fence panels on both sides of your gate is the ideal in all situations.
Do Not Hang Gate on Lone Soldier Post.
3
Box Contents
Premium Arched Top Vinyl Gate
For more information, contact us at 1 877-778-5733.
Posts Sold Separately
.090in. wall
thickness
Each Gate Box Includes:
• Gate Arch (1)
• Privacy Boards (4)
• Gate Arch Top Bracket (2)
Gate Latch (1)
• Vertical Stile (2)
• Gate Bottom Bracket (2)
• Gate Hinges (2)
• Bottom Rail (1)
• Gate Brace (1)
.050in. wall
thickness
• Tube of Glue (1)
• Stainless Steel Screws (20)
1
2
3
4
PRODUCT OVERVIEW
For more information, contact us at 1 877-778-5733.
4
Gate InstallationGate Assembly
Premium Arched Top Vinyl Gate
Ground
11.75in.
50.45in.
7.8in.
7.8in.
32.4in.
7.8in.
48in.
3.8in.
62.7in.
3.5in.
70in.
1.5in.
3.5in.
3.5in.
1.5in.
2in.
94in.
73.5in.
72in.
50in.
54.5in.
48in.
A
B
A B
C D
3.5in.
1.5in.
.090in. wall thickness
C
1.5in.
D
3.5in.
Concrete Footing
Posts Sold Separately
2in.
36in.
10in.
For more information, contact us at 1 877-778-5733.
5
Assemble the Gate Frame Bottom & Sides
STEP 1
Detailed Installation Instructions
Premium Arched Top Vinyl Gate
GLUE
Handle with care: vinyl weld
glue takes approximately
five minutes to cure.
Completely assembled gate shown. A - Run bead of vinyl weld continously around
the inside of the gate bracket.
C - Insert the bottom rail ALL THE WAY until it
BOTTOMS OUT INSIDE GATE BRACKET
D - Insert vertical gate stiles. They will
BOTTOM OUT
against bottom horizontal rail.
C
A
D
B - Insert the bottom rail ALL THE WAY until it BOTTOMS OUT inside gate bracket
B
UNEVEN EVEN
GLUE
GLUE
Did you do a dry run of assembly first?
Please read page 1 of instructions.
IMPORTANT!
Insert fully to this point.
Insert fully to this point.
For more information, contact us at 1 877-778-5733.
6
Premium Arched Top Vinyl Gate
Insert Boards & Assemble
the Gate Frame Top
STEP 2
Please ensure your
privacy boards fits snug
into the vertical gate stile.
A
A - Insert tongue and groove privacy
board 1 tightly into the vertical stile.
B - Privacy boards 2, 3, and 4 should
bottom-out inside bottom rail.
C - Insert gate arch into bracket as illustrated.
D - Slide gate arch (with brackets)
over the privacy boards and
vertical gate stiles.
C
B
D
GLUE
GLUE
Did you do a dry run of assembly first?
Please read page 1 of instructions.
CORRECT
Insert to
this point.
WRONG
1
2
3
4
1
For more information, contact us at 1 877-778-5733.
7
Fasten Gate Brackets &
Attach Gate Hardware
STEP 3
Premium Arched Top Vinyl Gate
A
A - Ensure your gate is square B - Fasten gate brackets to internal members
using screws
C - Fasten gate hinges onto the gate brackets
with screws
D - Fasten gate latch onto the gate bracket
with screws
C
B
D
Hinges must be installed
in these exact locations.
Latch must be installed
in this exact location.
For more information, contact us at 1 877-778-5733.
8
Premium Arched Top Vinyl Gate
Gate Brace Parts
B - Ensure that gate is square, then screw
bracing into place.
A
B
Assemble & Fasten
Gate Brace
STEP 4
Top Bar
Bottom Bar
A - Assemble gate bace
with bolts, washers and
nuts as necessary.
(4)
1.25” (#10)
Screws
(2)
.25” Lock
Washers
(2)
.25” Nuts
(2)
.25” x .75”
Hex Bolts
1
2
3
For more information, contact us at 1 877-778-5733.
9
STEP 5
Premium Arched Top Vinyl Gate
Position, Adjust & Align
Gate/Secure Hinges to Posts
A
A - Use temporary spacers or blocks to rest the gate on during alignment and installation
B - Fasten hinges to posts with screws
B
10
Level Gate & Adjust Hinges
STEP 6
Premium Arched Top Vinyl Gate
Adjust the spring tension
in gates as necessary.
Use steel insert pin.
A
A - Fasten gate hinges accordingly B -
Check for level, fit and function to latching post
C
B
D
LEVEL
Latch is designed for left and right hand applications.
Temporarily remove the spring, bolt and reverse paddle
portion as necessary.
C -
Hinges can be adjusted moderately
to bring gate into level alignment
with post
11
Align & Install Latch
STEP 7
Premium Arched Top Vinyl Gate
A
A / B - Align and fasten the gate latch catch to fit and function with the gate finger.
B
For more information, contact us at 1 877-778-5733.
Congratulations! You did it!
Go grab a beverage of your choice, admire your
handy work, and show us what you got by entering
our annual photo/video contests!
/