4 5
Battery information
• A rechargeable battery powers your device. Unplug the charger from the electrical plug and the device
when not in use
• If left unused, a fully charged battery will lose its charge over time. We recommend a full charge twice
a month to ensure battery integrity
• Please do not leave the device in hot or cold places, such as in a closed car in summer or winter
conditions, as it will reduce the capacity and lifetime of the battery
• Do not dispose of batteries in a re as they may explode. Batteries may also explode if damaged
Pairing a wireless device
1. Once the ear units have paired, you will hear a single beep in the left channel and an audible cue
stating the ear unit is ‘pairing’. Only the left unit will be ashing red and blue during this time
2. Turn your iOS, Android, or Windows device’s Bluetooth ON and search for new devices (check your
device’s manual if you’re unsure how to do this)
3. Select ‘KS Comet Buds’ from list of found devices
4. If asked for a passcode, enter ‘0000’ or ‘1234’ and the earbuds will then be connected to your device
5. After pairing successfully, the LED indicator (3) will ash blue and you will hear a double beep and
‘pairing successful’; you can then answer the phone or listen to your music
6. The next time the earbuds are switched on, they will automatically search for and attempt to connect
to the last paired device
Note: ‘Bluetooth’ is a trademark of Bluetooth SIG, Inc. This product is in no way aliated or endorsed by
Bluetooth SIG Inc.
Re-pairing or pairing new devices
1. Turn o Bluetooth connectivity on any previously paired devices
2. Follow the ‘Pairing a wireless device’ instructions from step 1
Functionality
Power on Hold the MFB (4) down for 3 seconds
Power o Hold the MFB (4) down for 5 seconds
To answer a call Press the MFB (4) and immediately release
To end call Press the MFB (4) and immediately release
Redial Press the MFB (4) twice quickly to redial your most recent call
Play/Pause Press the MFB (4) and immediately release