AuraPro

OPT7 LIGHTING AuraPro Installation guide

  • Hello! I've reviewed the AuraPro Halo-Mustang Installation Guide from OPT7 Lighting. This document covers the installation process for the LED grille strips, including wiring, app control, and important precautions like weatherproofing the connectors. I'm ready to answer your questions about the installation and use of this product.
  • What application do I need to control lights?
    Should I take precautions to protect wiring ?
    What should i do to avoid overheating?
Home » OPT7 LIGHTING » OPT7 LIGHTING AuraPro Manual Halo-Mustang Installation Guide
Contents
1 OPT7 LIGHTING AuraPro Manual Halo-
Mustang
2 COMPONENTS
3 INSTALLATION
4 INSTALLATION
5 OPT7 CONNECT APP
6 DISCLAIMER
7 Documents / Resources
7.1 References
8 Related Posts
OPT7 LIGHTING AuraPro Manual Halo-Mustang
OPT7 LIGHTING AuraPro Manual Halo-Mustang Installation
Guide
Manuals+ User Manuals Simplified.
COMPONENTS
INSTALLATION
1. Open the hood.
2. Wrap the LED strip into a circle shape and firmly press into place inside of the intake hole to secure.
AND/OR
Attach the strip as pictured as an alternate method of install.
3. Remove the plastic covers on the right and left side of the engine bay.
4. Run the wires along the front brace and connect to the control box.
5. Connect the positive wire to a constant (always on) or accessory (only when the car is on) circuit in the fuse
box by using an included fuse tap.
6. Connect the negative wire to a ground source, such as the one circled in the picture.
7. Test for function.
INSTALLATION
OPTION A
OPTION B
OPTIONAL: 2 x 12” Strips can be used to enhance your front grille or use as spares.
* IMPORTANT: The LED connectors are not waterproof. You will need to use HEAT SHRINK TUBE (not included)
or ELECTRICAL TAPE around the LED connectors to ensure the longevity of the lighting kit.
WARNING: Please ensure that the led strips/control box/wiring all are mounted in areas of the engine bay that will
not exceed 85C or 185F.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to https://wintis.ladesk.com/549690-AURA-
Door-AssistAUX-Installation-Guide
OPT7 CONNECT APP
Colors
Modes
Door Assist
Support
Ability to control up to 4 devices at once
QR CODE TO DOWNLOAD
Download the free “OPT7 CONNECT” App
App iOS (12+) available on App Store
Android (6 +) available on Google Play
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing this product. The Installation Guide is
intended as assistance to reduce setup time. OPT7 Lighting assumes no responsibility for improper installation. If
you are unfamiliar with your vehicle or inexperienced with aftermarket upgrades, please seek professional
assistance.
OPT7 recommends installation for safety and guidance. Modified installations or installation recommendations not
specified by OPT7 Lighting will void product warranty.
Documents / Resources
OPT7 LIGHTING AuraPro Manual Halo-Mustang [pdf] Installation Guide
AuraPro Manual Halo-Mustang, Manual Halo-Mustang, AuraPro Halo-Mustang, Halo-Mustang,
AuraPro
References
AURA Door Assist/AUX Installation Guide
Manuals+,
/