2. OPT7
  3. Aura Pro
Aura Pro

OPT7 Aura Pro Installation guide

  • Hello! I'm a chat assistant, and I've reviewed the user manual for the OPT7 AURA PRO Motorcycle Sport lighting kit. This document provides detailed instructions on how to install the light strips, control box, and connect the wiring of the lighting system. It also describes the Bluetooth control feature of the system using OPT7 AURA App. I'm ready to answer your questions about the installation or features.
  • Is the control box waterproof?
    Are LED connectors waterproof?
    How do I control the light colors?
MOTORCYCLE SPORT
AURA PRO
TM
INSTALLATION GUIDE
AURA BLUETOOTH CONTROL BOX
LIGHT STRIPS
MOUNTING KIT
VARIOUS EXTENSION WIRES POWER HARNESS WITH ON/OFF SWITCH ZIPTIES
Y-SPLITTERS
V1.5 061921
COMPONENTS
Inspect kit to ensure all contents was included.
STEP 1
Decide where to locate the
light strips and ensure wiring
has enough length for control
box to be installed in desired
location.
STEP 2
EXAMPLES
AUXILIARY WIRE EXTENSION WIRE
POSITIVE (+)
NEGATIVE (-)
INSTALLATION
Heat Shrink Tube
1
2
INSTALLATION
CONNECTED
ON
WHITE
RANDOM
BRIGHTNESS
SOLID
DOOR
ASSIST
OFF
Scan the QR code on the back of
the control box to download the
app.
STEP 3
Secure Control box in desired
location with Velcro or zipties.
* The control box is NOT waterproof.
Tuck it away from the elements.
STEP 4
Secure the light strips using the
zip ties to tie all the wiring away
from the moving components.
STEP 5
* IMPORTANT:
The LED connectors are not waterproof.
You will need to use HEAT SHRINK TUBE
or ELECTRICAL TAPE around the LED
connectors to ensure the longevity
of the lighting kit.
Open the OPT7 AURA App, pair
your smart device to the control
box, and pick your desired color!
STEP 6
DISCLAIMER
Scan for tutorial videos, troubleshooting tips, and
more.
Colors
Modes
Door Assist
Support
Ability to control up to
4 devices at once
-
-
-
-
-
QR Code to download
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT 7 AURA APP
NEED SUPPORT?
You may choose the desire color choice directly on the Aura app.
* NOTE: Trigger wire for door light is recommended if your dome light lights up progressively
when opening door.
This feature will activate when the aux wiring is connected to the trigger wire
for door light or positive wire of dome light.
AUX WIRING FOR A DOOR/DOME LIGHT
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by
OPT7 Lighting will void product warranty.
/