2. OPT7
  3. Aura Pro
Aura Pro

OPT7 Aura Pro Installation guide

  • Hello! I am an AI chatbot trained to assist you with the OPT7 Aura Pro Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the OPT7 Aura Pro?
    What components does the OPT7 Aura Pro include?
    Where should the OPT7 Aura Pro be installed?
    How do I connect the OPT7 Aura Pro to power?
    How do I control the OPT7 Aura Pro?
    Can I install the OPT7 Aura Pro myself?
    What is the warranty for the OPT7 Aura Pro?
AURA PRO
TM
INSTALLATION GUIDE
BLUETOOTH DRL HALO RGB
DODGE CHALLENGER 08-22
COMPONENTS
AURA BLUETOOTH CONTROL BOX
LIGHT STRIPS
HARDWIRE POWER HARNESS
MOUNTING KIT
EXTENSION WIRES
ZIPTIES
FUSE TAPS
Y-SPLITTERS
CIGARETTE LIGHTER POWER SUPPLY
Open the hood.
INSTALLATION
Wrap the LED strip into a circle shape
and firmly press into place inside of
the intake hole to secure.
Run the wires along the front brace and
connect to the control box.
Connect the positive wire to a constant
(always on) or accessory (only when the
car is on) circuit in the fuse box by using
an included fuse tap.
Connect the negative wire to a ground
source, such as the one circled in
the picture.
Test for function.
Attach the strip as pictured as an
alternate method of install.
Remove the plastic covers on the right
and left side of the engine bay.
STEP 1 STEP 4
STEP 2 STEP 5
STEP 6
STEP 7STEP 3
AND/OR
CONTROL BOX
WIRING
CONTROL BOX
WIRING
Heat Shrink Tube
1
2
OPTION A
OPTION B
AUXILIARY WIRE EXTENSION WIRE
AUXILIARY WIRE EXTENSION WIRE
FUSE
BOX
GROUND
(+)
(-)
INSTALLATION
* IMPORTANT:
The LED connectors are not waterproof.
You will need to use HEAT SHRINK TUBE
(not included) or ELECTRICAL TAPE
around the LED connectors to ensure
the longevity of the lighting kit.
WARNING: Please ensure that the led strips/control box/wiring all are mounted
in areas of the engine bay that will not exceed 85C or 185F.
Colors
Modes
Door Assist
Support
Ability to control up to
4 devices at once
-
-
-
-
-
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
OPT7 CONNECT APP
DISCLAIMER
QR CODE TO DOWNLOAD
Download the free “OPT7 CONNECT” App
• App iOS (12+) available on App Store
• Android (6 +) available on Google Play
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by
OPT7 Lighting will void product warranty.
AUX WIRING FOR A DOOR/DOME LIGHT
Please scan to see a detail instruction on Door Assist Sync or go to
https://wintis.ladesk.com/549690-AURA-Door-AssistAUX-Installation-Guide
/