2. KLUS
  3. OS22-DUO-LIN-Z
OS22-DUO-LIN-Z

KLUS OS22-DUO-LIN-Z User manual

  • Hello, I've reviewed the mounting instructions for the KLUS OS22-DUO-LIN-Z fastener. This document outlines the steps for installing the fastener, which includes components like a blockade, threaded hook, and pressure screw. It also covers important details such as the 5kg lifting capacity and the need for a 12V or 24V power supply for LED tapes. I'm ready to answer your questions about this product.
  • What is the lifting capacity of a single fastener?
    What voltage should LED tapes be connected to?
    What is included in the fastener set?
NOTE! All LED tapes must be connected to a 12 V or 24 V power supply.
IMPORTANT: Not all possible mounting procedures are presented here.
More mounting procedures and related accessories can be found at www.KlusDesign.eu.
Drawings in these instructions are simplied and only approximate the actual shapes.
www.KlusDesign.eu 1
OS22-DUO-LIN-Z Fastener – mounting instructions
1. GLAZA-DUO prole
2. Gland
3. Connector
4. LED tape
5. OS22-DUO-LIN-Z fastener
5.1 Blockade
5.2 Threaded hook
5.3 Conductor
5.4 Base
5.5 Head
5.6 Pressure screw
5.7 Spare conductor
6. Cover
7. Wire
8. Ceiling fastener
NOTE! The lifting capacity of a single fastener
is 5 kg. Designing multi-level lighting
installations should take into account the weight
of individual xtures and choose the number
of fasteners accordingly.
4.
2.
8.
1.
3. 4.
5.
6.
6.
7.7.
5 kg
++
__
5.1
5.1
5.2 5.2 5.3
5.3
5.4
5.5 5.5
5.6 5.6
5.7
3.
www.KlusDesign.eu 2
OS22-DUO-LIN-Z Fastener – mounting instructions
I
1.
2.
3.
3.
www.KlusDesign.eu 3
OS22-DUO-LIN-Z Fastener – mounting instructions
II
++
__
__
++
++
__
++
__
++
__
4.
www.KlusDesign.eu 4
OS22-DUO-LIN-Z Fastener – mounting instructions
III
5.
++
__
5.5
5.1
www.KlusDesign.eu 5
OS22-DUO-LIN-Z Fastener – mounting instructions
6.
6.
6.
IV
www.KlusDesign.eu 6
OS22-DUO-LIN-Z Fastener – mounting instructions
In case of damaged fastener’s connector, unfold
it for parts and replace damaged item.
Each fastener comes with a spare connector,
included in set.
After tightening the fastener’s pressure screw,
do not tighten or unscrew its head!
This will damage the connector.
7. 7.
5.7
5.6 5.6
V
230 V AC / 120 V AC
12 V / 24 V
www.KlusDesign.eu 7
OS22-DUO-LIN-Z Fastener – mounting instructions
++
__
8.
VI
www.KlusDesign.eu 8
OS22-DUO-LIN-Z Fastener – mounting instructions
OPTIONAL: PROPOSAL OF SUSPENDED FIXTURES CONFIGURATION.
++
++
__
__
/