2. aspenhome
  3. I629-9140-PRW

aspenhome I629-9140-PRW Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the aspenhome End Table I629-9140-DEN/PRW. This document outlines the necessary hardware, components, and steps for assembling your new end table. I'm ready to answer any specific questions you have regarding the instructions or the product itself.
  • What tools are required for assembly?
    How many bolts are needed to attach side assemblies to table top?
    How many bolts are needed to attach the bottom shelf?
Page 1/2
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
ITEM NO: I629-9140-DEN/PRW End Table
FUNCTIONALITY INSTRUCTION
HARDWARE LIST:
1 PC
No.
A
B
C
D
Description Sketch Quantity
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
Allen Wrench 4mm
COMPONENTS LIST:
No.
1
2
Description Sketch Quantity
Table Top
Side Assembly 1 PC
10 PCS
Bolt Ø1/4" x 1-3/4" (20)
32 PCS
1 PC
Bottom Shelf
10 PCS
10 PCS
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
08-12-2022
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
ITEM NO: I629-9140-DEN/PRW End Table
STEP 1: Put the table top face down on a soft surface. Pull out the drawer. Attach the side
assemblies to table top by using 6 bolts(A), lock washers(B) and flat washers(C). Do not
completely tighten bolts.
STEP 2: Attach the bottom shelf to side assemblies by using 4 bolts(A), lock washers(B) and
flat washers(C). Use the Allen wrench provided to tighten all the bolts. Push back the drawer.
Turn the assembled table to the upright position.
ABC
D
Table Top
Side Assembly
Side Assembly
Bottom Shelf
ABC
D
08-12-2022
/