aspenhome I629-450-DEN Assembly Instructions

Type
Assembly Instructions
Page 1/2
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
ITEM NO: I629-450-DEN/PRW 2 Drawer Nightstand
FUNCTIONALITY INSTRUCTION
Cedar-lined Bottom Drawer
Adjust the leveler
when necessary
Leveler on Legs
Felt-lined Top Drawer
Double Powered USB Port
for Charging
05-10-2022
HARDWARE LIST:
1 PC
No.
A
B
C
D
E
Description Sketch Quantity
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
Allen Wrench 4mm
8 PCS
COMPONENTS LIST:
No.
1
2
Description Sketch Quantity
Case
Left Front Leg 1 PC
8 PCS
Bolt Ø1/4" x 2" (20)
8 PCS
Wood Screw #4 x 1-1/2" 8 PCS
3
41 PC
2 PCS
5
1 PC
Right Front Leg
Back Leg
6
2 PCS
1 PC
Bottom Frame
Side Stretcher
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
05-10-2022
ITEM NO: I629-450-DEN/PRW 2 Drawer Nightstand
STEP 1: Put the case face down on a soft surface. Pull out the drawers. Attach the left/right
front leg and the back legs to case by using 8 bolts(A), lock washers(B) and flat washers(C).
Do not completely tighten bolts.
STEP 2: Attach the bottom frame and side stretchers to legs with 8 wood screws(E). Use the
Allen wrench provided and the phillips screwdriver to tighten all the bolts and screws. Push back the
drawers. Turn the assembled case to the upright position.
A
B
CD
Right Front Leg
Back Leg
Left Front Leg
Case
Bottom Frame
Side Stretcher
Side Stretcher
Side Stretcher
E
E
Bottom Frame
  • Page 1 1
  • Page 2 2

aspenhome I629-450-DEN Assembly Instructions

Type
Assembly Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI