aspenhome I287-9140 Assembly Instructions
- Type
- Assembly Instructions
Page 1/2
ITEM NO: I287-9140 End Table
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
FOR INDOOR USE ONLY
FUNCTIONALITY INSTRUCTION
HARDWARE LIST:
1 PC
No.
B
C
D
E
Description Sketch Quantity
Bolt Ø1/4" x 3/4"
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
Allen Wrench 4mm
8 PCS
COMPONENTS LIST:
No.
1Description Sketch Quantity
Table Top
12 PCS
A1 PC
Bolt Ø1/4" x 1-3/4" 4 PCS
1 PC
2 PCS
2 PCS
2
3
4 Bottom Shelf
12 PCS
Metal Leg Frame
Adjust the leveler
when necessary
Leveler on legs
Connect Stretcher
08-10-2020
Page 2/2
ITEM NO: I287-9140 End Table
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 1: Attach the bottom shelf and the connect stretchers to one of the metal leg frame by
using 4 bolts(A), lock washers(C) and flat washers(D) as shown below. Do not completely
tighten bolts.
ACD
E
STEP 3: Attach another metal leg frame to connect stretchers and bottom shelf by using 4 bolts(A),
lock washers(C) and flat washers(D). Do not completely tighten bolts.
Connect stretcher
Bottom Shelf
Metal Leg Frame
STEP 4: Put the table top face down on a soft surface.
STEP 5: Attach the base assembly to table top by using 4 bolts(B), lock washers(C) and flat
washers(D). Then use an allen wrench to tighten all the bolts.
STEP 6: Turn the assembled table to the upright position.
B
C
D
E
ACD
E
Base Assembly
A
C
D
E
A
C
D
E
08-10-2020
-
1
-
2
aspenhome I287-9140 Assembly Instructions
- Type
- Assembly Instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
aspenhome I644-9130 Assembly Instructions
-
-
-
-
-
-
-
-
-
