aspenhome I629-9100-DEN Assembly Instructions

  • I have reviewed the assembly instructions for the aspenhome Cocktail Table I629-9100-DEN/PRW model. The document includes a detailed hardware and component list, along with step-by-step assembly instructions. I'm ready to answer your questions about assembling this product and its components.
  • What tools are needed for assembly?
    What is included in the hardware list?
    What are the main components of the cocktail table?
Page 1/2
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
ITEM NO: I629-9100-DEN/PRW Cocktail Table
FUNCTIONALITY INSTRUCTION
COMPONENTS LIST:
No.
1
2
Description Sketch Quantity
Table Top
Side Assembly 1 PC
32 PCS
1 PC
Central Assembly
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
HARDWARE LIST:
No.
A
B
C
D
Description Sketch Quantity
Lock Washer Ø5/16"
Flat Washer Ø5/16" x 3/4"
6 PCS
Bolt Ø5/16" x 1-1/2" (18)
1 PC
G Allen Wrench 4mm
E
F Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
2 PCS
Bolt Ø1/4" x 1-1/2" (20) 2 PCS
2 PCS
6 PCS
6 PCS
02-07-2023
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
ITEM NO: I629-9100-DEN/PRW Cocktail Table
STEP 1: Put the table top face down on a soft surface. Attach the central assembly to
table top by using 2 bolts(A), lock washers(B) and flat washers(C) as shown below.
Do not completely tighten bolts.
STEP 2: Attach the side assemblies to table top by using 4 bolts(A), lock washers(B),
flat washers(C) and using 2 bolts(D), lock washers(E) flat washers(F) as shown below.
Completely tighten all bolts. Turn the assembled table to the upright position.
Table Top
Central Assembly
D
E
F
G
Central Assembly
Central Assembly
Side Assembly
ABC
G
Side Assembly
A
B
C
G
02-07-2023
/