2. aspenhome
  3. I215-9140

aspenhome I215-9140 Assembly Instructions

  • Hello! I'm a chat assistant, and I've reviewed the assembly instructions for the Liv360 I215-9140 End Table. This document provides a detailed list of components and hardware, as well as step-by-step instructions for assembling the table. It also mentions that this table has a 2 AC outlet power pack and levelers on the bases. I'm here to answer any questions you may have about its construction
  • What tool is required for assembly?
    What is the quantity of bolts, lock washers and flat washers?
    How many side assemblies are there?
Page 1/2
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
HARDWARE LIST:
1 PC
No.
B
C
D
Description Sketch Quantity
Bolt Ø1/4" x 2-3/16"
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
Allen Wrench 4mm
18 PCS
A
COMPONENTS LIST:
No.
1Description Sketch Quantity
Table Top Assembly
2
3 Side Assembly 2 PCS
1 PC
ITEM NO: I215-9140 Liv360 End Table
Bottom Shelf
FUNCTIONALITY INSTRUCTION
Leveler on bases
Adjust the leveler
when necessary
1 PC
Table Back
2 AC outlet
Power Pack
18 PCS
18 PCS
06-22-2020
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 3: Attach the bottom shelf to the side assemblies by using 6 bolts (A), lock washers(B)
and flat washers(C). Use the Allen wrench provided to tighten all the bolts.
STEP 4: Put the drawer back to the original position. Turn the assembled table to the upright
position.
Side Assembly
Table Top Assembly
ITEM NO: I215-9140 Liv360 End Table
STEP 1: Put the table top assembly face down on a soft surface.
STEP 2: Take out the drawer, then attach the side assemblies to table top assembly by
using 12 bolts(A), lock washers(B) and flat washers(C). Do not completely tighten bolts.
Bottom Shelf
BC
A
D
BC
A
D
06-22-2020
/