2. aspenhome
  3. I597-9140

aspenhome I597-9140 Assembly Instructions

  • Hello! I have reviewed the assembly instructions for the aspenhome I597-9140 End Table. This document describes how to assemble your new end table, including attaching the legs, the bottom shelf, and reversing the drawer handle. It also notes the features, such as the double powered USB port and felt-lined drawer. I'm here to assist you with any specific questions you may have about the assembly process or the table itself.
  • What tool is required for assembly?
    How many bolts are needed to attach the legs to the table top?
    What other hardware is used in the assembly?
    What hardware is needed to attach the bottom shelf?
    Can the drawer handle be changed during assembly?
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 1/2
ITEM NO: I597-9140 End Table
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
HARDWARE LIST:
1 PC
No.
A
B
C
D
Description Sketch Quantity
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
Allen Wrench 4mm
12 PCS
COMPONENTS LIST:
No.
1
2
3
Description Sketch Quantity
1 PC
1 PC
12 PCS
12 PCS 4 PCS
FUNCTIONALITY INSTRUCTION
Table Top
Leg
Bottom Shelf
Adjust the leveler
when necessary
Leveler on Legs
Felt-lined Drawer
Double Powered USB
Port for Charging
Table Back
Bolt Ø1/4" x 2-3/8"
04-13-2022
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/2
STEP 1: Put the table top face down on a soft surface. Pull the drawer out and attach the
legs to the table top by using 8 bolts(A), lock washers(B) and flat washers(C). Do not
completely tighten bolts.
STEP 2: Attach the bottom shelf to the legs by using 4 bolts (A), lock washers(B) and flat
washers(C). Completely tighten all bolts. Push the drawer back. Turn the assembled table to
the upright position.
ITEM NO: I597-9140 End Table
Leg
Table Top
A
B
CD
Bottom Shelf
A
B
CD
Handle
Screw
Handle
04-13-2022
STEP 3: Reverse the handle by removing the screws while the drawer is open and attach the handle
to the front of the drawer with screws as shown below.
/