Page 1/2
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
ITEM NO: I629-9151-DEN/PRW Console Bar Table
FUNCTIONALITY INSTRUCTION
Double Powered USB
Port for Charging.
Back View
HARDWARE LIST:
1 PC
No.
A
B
C
D
Description Sketch Quantity
Lock Washer Ø5/16"
Flat Washer Ø5/16" x 3/4"
Allen Wrench 4mm
COMPONENTS LIST:
No.
1
2
Description Sketch Quantity
Table Top
Left Side Assembly 1 PC
4 PCS
Bolt Ø5/16" x 1-1/2" (18)
31 PC
Central Assembly
4 PCS
Bolt Ø5/16" x 2-1/2" (18)
E
Right Side Assembly
4
1 PC
1 PC
2 PCS
Bolt Ø1/4" x 1-1/2" (20)
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
F
G
H
8 PCS
8 PCS
2 PCS
2 PCS
02-07-2023
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 1: Put the table top face down on a soft surface. Attach the central assembly to
table top by using 4 bolts(B), lock washers(C) and flat washers(D) as shown below.
Do not completely tighten bolts.
STEP 2: Attach the left/right side assemblies to table top by using 4 bolts(A), lock washers(C),
flat washers(D) and using 2 bolts(E), lock washers(F) flat washers(G) as shown below.
Completely tighten all bolts. Turn the assembled table to the upright position.
ITEM NO: I629-9151-DEN/PRW Console Bar Table
B
C
D
H
Central Assembly
Table Top
E
F
G
H
Central Assembly
Side Assembly
A
C
D
H
Right Side Assembly
Left Side Assembly
Table Top
02-07-2023
/
