RASSEMBLY INSTRUCTIONS
ah
STEP 1: Put the table top face down on a soft surface.
STEP 2: Attach the connect stretchers to table top by using 6 bolts(B), lock washers(C) and flat
washers(D) as shown below. Do not completely tighten bolts.
ITEM NO: I287-9150 Sofa Table
STEP 3: Attach side frames (left & right) with "L" and "R" markings to connect stretchers by
using 4 bolts(A), lock washers(C) and flat washers(D). Do not completely tighten bolts.
STEP 4: Attach the support stretchers to table assembly by using 4 bolts(A), lock washers(C) and
flat washers(D). Then use an allen wrench to tighten all the bolts.
C
D
B
E
Connect Stretcher
STEP 5: Turn the assembled table to the upright position.
Table Back Support Stretcher
Side Frame (left)
Side Frame (right)
Table Assembly
E
C
D
A
E
C
D
A
Table Top
E
CD
A
Connect Stretcher