2. aspenhome
  3. I631-9150a

aspenhome I631-9150a Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the aspenhome sofa console table (I631-9150) and stool (I631-9200). I'm ready to help you with any questions about assembling your new furniture, including details about the included hardware, components, and assembly steps.
  • What tools are required for assembly?
    What is included in the hardware list for the sofa console table?
    What is included in the components list for sofa console table?
Page 1/2
ITEM NO: I631-9150 Sofa Console Table
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
HARDWARE LIST:
No.
B
C
D
Description Sketch Quantity
Lock Washer Ø1/4"
Flat Washer Ø1/4" x 3/4"
A
COMPONENTS LIST:
No.
1Description Sketch Quantity
2 Side Frame Left
3
1 PC
1 PC
Table Top
Hex Bolt Ø1/4" x 1-1/2"
1 PC
Allen Wrench 4mm
4 PCS
4 PCS
4 PCS
FUNCTIONALITY INSTRUCTION
Adjust the leveler
when necessary
Leveler on Legs
4 Back Stretcher 1 PC
1 PC
Side Frame Right
E
Wood Screw #4 x 2" 2 PCS
Qi Wireless charger
F
G
H
I
Hanger Bolt Ø5/16"x4-1/2"
Hex Nut Ø5/16"
Hex Wrench 12mm
4 PCS
4 PCS
Half Moon Washer 5/16" 4 PCS
1 PC
04-25-2023
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 3: Attach the back stretcher to side frames with wood screws(I). Completely tighten
all nuts and bolts. Turn the assembled table to the upright position.
STEP 1: Lay the table top face down on a soft surface.
ITEM NO: I631-9150 Sofa Console Table
Table Top
Side Frame Left
Side Frame Right
I
Back Stretcher
I
E
F
G
04-25-2023
H
STEP 2: Screw the bolts(E) into side frame left and side frame right as shown below. Align
the bolts with the holes in the end of rails under the table top and attach the side frames to
table top by using 4 half moon washers(F), nuts(G), and 4 bolts(A), lock washers(B), flat
washers(C). Do not completely tighten nuts and bolts.
Rail
E
F
G
H
A
B
C
D
Page 1/2
ITEM NO: I631-9200 Stool
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
04-11-2023
FUNCTIONALITY INSTRUCTION
/