aspenhome I644-6030 Assembly Instructions

aspenhome
Brand
aspenhome
Model
I644-6030
Type
Assembly Instructions
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
ITEM NO: I644-6030 Trestle Dining Table
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
FUNCTIONALITY INSTRUCTION
HARDWARE LIST:
No. Description Sketch Quantity
A
B
C
D Allen Wrench 4mm 1 PC
Lock Washer Ø5/16"
Flat Washer Ø5/16" x 3/4"
16 PCS
16 PCS
COMPONENTS LIST:
No. Description Sketch Quantity
11 PC
22 PCS
3
41 PC
Adjust the leveler
when necessary
Leveler on Bases
Page 1/2
Bolt Ø5/16" x 2" Table Top
Pedestal
Wood Covering
Top Stretcher
2 PCS5 Bottom Stretcher 1 PC16 PCS
04-27-2023
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
ITEM NO: I644-6030 Trestle Dining Table
Page 2/2
STEP 1: Put the pedestal upside down on a soft surface.
STEP 2: Attach the top stretcher and bottom stretcher to the pedestals by using 4 bolts (A),
lock washers (B) and flat washers (C) as shown below. Use the allen wrench (D) to tighten
all bolts.
STEP 3: Put the table top upside down on a soft surface, and attach the pedestal assembley to
the table top by using 12 bolts (A), lock washers (B) and flat washers (C) as shown below.
Use the allen wrench (D) to tighten all bolts.
STEP 4: Attach the wood coverings to the pedestal assembley as shown below. Turn the
assembled table to the upright position.
Top Stretcher
Bottom Stretcher
AC
B
D
B
CD
A
Pedestal
Pedestal
A
C
D
E
Table Top
Wood Covering
Wood Covering
04-27-2023
Page 1/2
ITEM NO: I644-6640S Dining Side Chair w/ Wood Seat (2/Ctn)
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
FUNCTIONALITY INSTRUCTION
HARDWARE LIST:
No.
D
Description Sketch Quantity
Lock Washer Ø5/16"
Flat Washer Ø5/16" x 3/4"
A
COMPONENTS LIST:
No.
1Description Sketch Quantity
2 Chair Seat
3
1 PC
1 PC
Left Front Leg
Chair Back
4 "H" Stretcher
4 PCS
Wood Screw #4 x 1-1/2"
5 Right Front Leg 1 PC
1 PC
1 PC
B
C
E
F
Bolt Ø5/16" x 2"
Bolt Ø5/16" x 3-1/4"
10 PCS
10 PCS
Allen Wrench 4mm 1 PC
4 PCS
G
Bolt Ø5/16" x 1-3/4" 2 PCS
4 PCS
04-27-2023
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Right Front Leg
STEP 1: Attach the left front leg and right front leg to
chair seat by using 4 bolts (B), lock washers (D) and flat
washers (E), Do not completely tighten bolts.
Chair Seat
Right Front Leg
STEP 2: Attach the chair seat to chair back by using
4 bolts (A), 2 bolts (C), 6 lock washers (D), 6 flat
washers (E). Do not completely tighten bolts.
Chair Seat
Chair Back
D
E
A
C
STEP 3: Attach the "H" stretcher to the front legs
and chair back with wood screws (G). Completely
tighten all wood screws and bolts. Turn the
assembled chair to the upright position.
Left Front Leg
DBF
ITEM NO: I644-6640S Dining Side Chair w/ Wood Seat (2/Ctn)
G
G
D
E
F
F
"H" Stretcher
E
04-27-2023
Page 1/2
ITEM NO: I644-6660S Counter Side Chair w/ Uph Seat (2/Ctn)
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference. FOR INDOOR USE ONLY
FUNCTIONALITY INSTRUCTION
COMPONENTS LIST:
No.
1Description Sketch Quantity
2 Chair Seat
3
1 PC
1 PC
Chair Back
41 PC
5 Left Side Stretcher 1 PC
6
1 PC
1 PC
Right Front Leg
Left Front Leg
Right Side Stretcher
HARDWARE LIST:
No.
D
Description Sketch Quantity
Lock Washer Ø5/16"
Flat Washer Ø5/16" x 3/4"
A
4 PCS
Wood Screw #4 x 1-1/2"
B
C
E
F
Bolt Ø5/16" x 2"
Bolt Ø5/16" x 3-1/4"
10 PCS
10 PCS
Allen Wrench 4mm 1 PC
4 PCS
G
Bolt Ø5/16" x 1-3/4" 2 PCS
4 PCS
04-27-2023
Page 2/2
aspenhome
RASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
ITEM NO: I644-6660S Counter Side Chair w/ Uph Seat (2/Ctn)
Right Front Leg
STEP 1: Attach the left front leg and right front leg to
chair seat by using 4 bolts (B), lock washers (D) and flat
washers (E), Do not completely tighten bolts.
Chair Seat
Right Front Leg
Left Front Leg
EDBF
STEP 2: Attach the chair seat to chair back by using
4 bolts (A), 2 bolts (C), 6 lock washers (D), 6 flat
washers (E). Do not completely tighten bolts.
Chair Seat
Chair Back
D
E
A
C
D
E
F
F
Left Side Stretcher
Right Side Stretcher
STEP 3: Attach the left side stretcher and right
side stretcher to the front legs and chair back with
wood screws (G). Completely tighten all wood
screws and bolts. Turn the assembled chair to the
upright position.
G
G
04-27-2023
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

aspenhome I644-6030 Assembly Instructions

aspenhome
Brand
aspenhome
Model
I644-6030
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents