International Concepts C46-61P Operating instructions

International Concepts
Brand
International Concepts
Model
C46-61P
Type
Operating instructions

This manual is also suitable for

International Concepts C46-61P is a sturdy and stylish piece of furniture perfect for any home. Crafted from high-quality materials, this chair is built to last. Assembly is easy following the step-by-step instructions included in the manual. Once assembled, the chair provides comfortable seating with its supportive back and cushioned seat. The neutral color scheme of the chair makes it a versatile addition to any décor. Whether used in the kitchen, dining room, or living room, the International Concepts C46-61P is sure to provide years of enjoyment.

International Concepts C46-61P is a sturdy and stylish piece of furniture perfect for any home. Crafted from high-quality materials, this chair is built to last. Assembly is easy following the step-by-step instructions included in the manual. Once assembled, the chair provides comfortable seating with its supportive back and cushioned seat. The neutral color scheme of the chair makes it a versatile addition to any décor. Whether used in the kitchen, dining room, or living room, the International Concepts C46-61P is sure to provide years of enjoyment.

ITEM NO.: C
-
61
REVISED MAR 19, 2013
Printed in Vietnam
Description
Item No.
: CAFE CHAIR
: C-61
ASSEMBLY INSTRUCTIONS
ITEM NO.: C
-
61
REVISED MAR 19, 2013
Printed in Vietnam
BEFORE ASSEMBLY
Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed
for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however,
make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please
contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free
888-944-8396.
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from
being scratched.
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have the following parts:
NO Description Qty Sketch NO Description Qty Sketch
A
Chair
back
1
B
Seat
Frame
1
C Seat 1
D
Front Leg
(L-R)
2
E
Side
Stretcher
(L-R)
2
F
Middle
stretcher
1
ITEM NO.: C
-
61
REVISED MAR 19, 2013
Printed in Vietnam
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Short bolt
(M6x40mm)
3
2
Medium bolt
(M6x60mm)
4
3
Long bolt
(M6x80mm)
4
4
Screw
(M4x35mm)
10
5
Lock washer
(6.5x11mm)
11
6
Flat washer
(6.5x19mm)
11
7
Allen key
(4x80mm)
1
STEP 1
Attach Seat Frame (B) to the Back (A) by using bolts (1) and (3), washers (5) and (6). Tighten with
allen key (7) as shown below.
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.
ITEM NO.: C
-
61
REVISED MAR 19, 2013
Printed in Vietnam
STEP 2
Attach middle stretcher (F) to side stretchers (E) with short screws (4). Tighten with a screwdriver.
STEP 3
Attach front Legs (D) to the seat frame with bolts (2), and washers (5) and (6). Tighten with allen key
(7).
Place side stretchers (E) (from step 2) between front and back legs. Use the screwdriver to tighten the
screws (4) as shown below.
ITEM NO.: C
-
61
REVISED MAR 19, 2013
Printed in Vietnam
STEP 4
Attach the seat (C) to top of the seat frame (from Step 3) by using screws (4). Tighten with a
screwdriver.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

International Concepts C46-61P Operating instructions

International Concepts
Brand
International Concepts
Model
C46-61P
Type
Operating instructions
This manual is also suitable for

International Concepts C46-61P is a sturdy and stylish piece of furniture perfect for any home. Crafted from high-quality materials, this chair is built to last. Assembly is easy following the step-by-step instructions included in the manual. Once assembled, the chair provides comfortable seating with its supportive back and cushioned seat. The neutral color scheme of the chair makes it a versatile addition to any décor. Whether used in the kitchen, dining room, or living room, the International Concepts C46-61P is sure to provide years of enjoyment.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents