Features
•
Compression molded from Sterling’s exclusive solid
Vikrell
®
material
•
Modular 4-piece design
•
Lightly pebbled bottom surface for sure footing
•
Tongue-and-groove ″snap together″ design
•
Durable high gloss finish
•
10 year consumer/3 year commercial limited warranty
•
Convenient shelves provide generous storage
•
Shaving ledge and foot rest added for comfort
•
Tile design
•
Wall surround allows for attachment of grab bars
•
42″ (106.7 cm) x 35-1/4″ (89.5 cm) x 77″ (195.6 cm)
complete unit rough-in dimensions include nailing
flange
•
42″ (106.7 cm) x 34″ (86.4 cm) x 75-3/4″ (192.6 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ANSI Z124.1.2
•
IAPMO/UPC
•
CSA B45
•
ASTM F462 Slip Resistance
42″ (106.7 cm) SHOWER RECEPTOR
AND WALL SURROUND WITH
BACKER BOARDS
72110106
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
72110106 42″ (98.1 cm) shower receptor and wall surround with backer boards ❑ 0 ❑ Other_____
Model Wall Component Description Colors/Finishes
72112106 Back wall with backer boards ❑ 0 ❑ Other_____
72105106 End wall set with backer boards ❑ 0 ❑ Other_____
ENSEMBLETM
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1065814-4-
A
Technical Information
Model Door maximum
width
Door maximum
height
72110106 38-5/8″ (98.1 cm) 70-1/2″ (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Studs should be positioned roughly as shown for roofing nail
installation.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
1-5/8" (4.1 cm)
at Midpoint
34"
(86.4 cm)
72-1/2"
(184.2 cm)
77"
(195.6 cm)
42"
(106.7 cm)
1-1/4"
(3.2 cm)
5-1/2"
(14 cm)
4-1/2"
(11.4 cm)
42" (106.7 cm) Min
42-1/8" (107 cm) Max
35-1/4"
(89.5 cm)
10" (25.4 cm)
4" (10.2 cm)
8"
(20.3 cm)
26"
(66 cm)
13"
(33 cm)
13"
(33 cm)
16"
(40.6 cm)
21"
(53.3 cm)
15-13/16"
(40.2 cm)
3-5/16"
(8.4 cm) OD
Drain Hole
4-1/2"
(11.4 cm)
D. Drain
Cutout
Recommended Roofing
Nail Locations (4 total)
1" (2.5 cm)
from Grout Line
1" (2.5 cm)
10"
(25.4 cm)
2" (5.1 cm)
10" (25.4 cm)
Backer board locations
Back Wall
End Wall
Note: Right and left end walls are the
same, only mirrored.
3-1/2"
(8.9 cm)
12" (30.5 cm)
Grab Bar
18" (30.5 cm)
or 24" (61 cm)
Grab Bar
12"
(30.5 cm)
Grab Bar
3-1/2" (8.9 cm)
Product Diagram
ENSEMBLETM
ENSEMBLETM 42″ (106.7 cm) SHOWER RECEPTOR AND WALL SURROUND WITH BACKER BOARDS
Page2of2
1065814-4-
A
-
1
-
2
Sterling Plumbing Shower Receptor and Wall Surround with Backer Boards 72110106 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sterling 72110106-0 Specification Sheet
-
Sterling Plumbing Shower System with Backer Boards 72120106 User manual
-
Sterling Shower System with Backer Boards 72120106 Specification Sheet
-
-
-
-
-
-
-
Other documents
-
-
-
-
-
-
-
-
-
-