Sterling Shower Receptor and Wall Surround with Backer Boards 72230106, 72230106-0 Specification Sheet

  • Hello! I am an AI chatbot trained to assist you with the Sterling Shower Receptor and Wall Surround with Backer Boards 72230106 Specification Sheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Features
Compression molded from our exclusive solid Vikrell
®
material
Tongue-and-groove 4-piece modular design allows for
easy snap together installation
Durable high-gloss finish
10-year consumer/3-year commercial limited warranty
Convenient shelves provide generous storage
Shaving ledge and foot rest added for comfort
Wall surround allows for attachment of grab bars
60 (152.4 cm) x 35-1/4 (89.5 cm) x 77 (195.6 cm)
complete unit rough-in dimensions include nailing
flange
60 (152.4 cm) x 34 (86.4 cm) x 75-3/4 (192.4 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASTM E162
ASTM E662
CSA B45.5/IAPMO Z124
60 (152.4 cm) SHOWER BASE AND
SURROUND WITH BACKER BOARDS
72230106
Colors/Finishes
0: White
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
72230106 60 (152.4 cm) shower base and curve wall surrounds with backer boards 0 Other_____
Model Wall Component Description Colors/Finishes
72232106 Back wall with backer boards 0 Other_____
72205106 End wall with backer boards 0 Other_____
ENSEMBLETM
Page 1 of 2
1064361-4-
D
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Model Door maximum
width
Door maximum
height
72230106 56-5/8 (143.8 cm) 70-1/2 (179.1 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown.
Attach grab bars at the specified backer board locations only.
Note: Right and left end walls are the same, only mirrored.
1"
(2.5 cm)
Backer board locations
3"
(7.6 cm)
Back Wall
3-1/2" (8.9 cm)
18" (45.7 cm) Grab Bar
42" (106.7 cm) Grab Bar
1-3/8" (3.5 cm)
at Midpoint
35-1/4"
(89.5 cm)
1-1/4"
(3.2 cm)
72-1/2"
(184.2 cm)
77"
(195.6 cm)
5-1/2"
(14 cm)
4-1/2"
(11.4 cm)
60"
(152.4 cm)
46"
(116.8 cm)
42"
(106.7 cm)
Grab Bar
2" (5.1 cm)
3"
(7.6 cm)
1"
(2.5 cm)
22" (55.9 cm)
End Wall
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
35-1/4"
(89.5 cm)
26"
(66 cm)
4" (10.2 cm)
8"
(20.3 cm)
10" (25.4 cm)
16"
(40.6 cm)
14"
(35.6 cm)
16"
(40.6 cm)
4-1/2"
(11.4 cm) D.
Drain Cutout
15-13/16"
(40.2 cm)
3-5/16"
(8.4 cm) D.
Drain Hole
30" (76.2 cm)
14"
(35.6 cm)
Product Diagram
ENSEMBLETM
ENSEMBLETM 60 (152.4 cm) SHOWER BASE AND SURROUND WITH BACKER BOARDS
Page2of2
1064361-4-
D
/