Midmark 6206, 6207, 6208 (Non-Powered) Installation guide

Type
Installation guide

This manual is also suitable for

9A480001
Installation Instructions
INS-9A480001 (Rev.A)
Align Barcode Holder to specifi ed
hole placements (see Fig. A).
Secure to worksurface (from underside)
using (4) screws.
1
Tools required:
Phillips head screwdriver or #2 Square drive bit
Parts Included:
(4) #10-24 x 1 1/4” Long Pan Head Phillips Drive Self Locking PHMS
(1) Barcode Holder
(2) Velcro strips
Fig. A
Midmark Corporation | 60 Vista Drive | PO Box 286 | Versailles, Ohio 45380-0286 | USA | midmark.com
  • Page 1 1

Midmark 6206, 6207, 6208 (Non-Powered) Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI