Harris DVSD6800+ Operating instructions

Edition C

175-000262-00

DVSD / DVSE6800+

Dual SDI / ASI Serial Digital Video

Distribution Amplifiers

Installation and Operation Manual

Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.

DVSD / DVSE6800+

Dual SDI / ASI Video

Distribution Amplifiers

Installation and Operation

Manual

Edition C

March 2006

Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.

Trademarks and Copyrights

CCS, CCS CoPilot, CCS Navigator, CCS Pilot, Command Control

System, CineTone, CinePhase, CineSound, DigiBus, DigiPeek, Digital

Glue, DigiWorks, DTV Glue, EventWORKS, EZ HD, Genesis, HDTV

Glue, Image Q, Inca, Inca Station, InfoCaster, Inscriber, Inscriber CG—

FX, Icon, IconLogo, IconMaster, IconMaster Nav, IconSet, IconStation,

Integrator, LeFont, Leitch, LogoMotion, MediaFile, MIX BOX, NEO,

the NEO design, NEOSCOPE, NewsFlash, Nexio, Opus, Panacea,

PanelMAPPER, Platinum, Portal, PROM-Slide, RouterMAPPER,

RouterWORKS, Signal Quality Manager, SpyderWeb, SuiteView,

TitleMotion, UNIFRAME, Velocity, VelocityHD, VideoCarte,

Videotek, and X75 are trademarks of Leitch Technology International

Inc. which may be registered in the United States, Canada, and / or other

countries. All other trademarks are the property of their respective

owners.

supersedes all previous releases. Printed in Canada.

Warranty Information

The Leitch Limited Warranty Policy provides a complete description of

your warranty coverage, limitations, and exclusions, as well as

procedures for obtaining warranty service. To view the complete

warranty, visit www.leitch.com>Support>Warranties

.

DVSD / DVSE6800+ Installation and Operation Manual v

Contents

Preface

Manual Information .............................................................................. vii

Purpose ........................................................................................... vii

Audience ........................................................................................ vii

Revision History ............................................................................ vii

Writing Conventions ..................................................................... viii

Obtaining Leitch Documents ........................................................ viii

Unpacking / Shipping Information .......................................................... ix

Safety Standards and Compliances ..........................................................x

Safety Terms and Symbols ...............................................................x

Restriction on Hazardous Substances (RoHS) Directive ................ xi

Waste from Electrical and Electronic Equipment

(WEEE) Directive .......................................................................... xii

Chapter 1: Introduction

Overview ..................................................................................................1

Product Description ..................................................................................2

Typical Broadcast and Production Applications ..............................2

Main Features ...................................................................................2

Module Descriptions .................................................................................3

Front Module ....................................................................................3

Back Modules ...................................................................................4

Signal Flow ..............................................................................................6

Chapter 2: Installation

Overview ..................................................................................................9

Maximum 6800+ Frame Power Ratings ................................................10

Unpacking the Module ...........................................................................11

vi DVSD / DVSE6800+ Installation and Operation Manual

Contents

Preparing for Installation ............................................................... 11

Checking the Packing List ............................................................. 11

Setting Jumpers ..................................................................................... 12

Installing 6800+ Modules ..................................................................... 14

Required Frames and Back Module Connector Types .................. 14

Installing DVSD / DVSE6800+ Modules ....................................... 14

Removing DVSD / DVSE6800+ Modules ..................................... 14

Making Connections ...................................................................... 14

Chapter 3: Operation

Overview ................................................................................................ 15

Understanding Jumper Controls ............................................................ 16

Introducing Jumper Control Types ................................................ 16

P1 Jumpers ..................................................................................... 16

P2 / P3 Jumpers ............................................................................... 17

Understanding Parameter Types ............................................................ 19

Adjustable Parameters .................................................................... 19

Read-Only Parameters ................................................................... 19

Operating Notes...................................................................................... 19

Setting Remotely-Controlled Parameters .............................................. 21

Changing Parameter Settings ................................................................. 22

Recalling Default Parameter Settings ............................................ 22

Reading the Software Version ....................................................... 22

Reading the Hardware Version ...................................................... 22

LEDs and Alarms .................................................................................. 23

Module Status Indicator LED ........................................................ 23

Alarms ............................................................................................ 23

Other LED Descriptions ................................................................. 23

Chapter 4: Specifications

Overview ................................................................................................ 25

Inputs ..................................................................................................... 26

Outputs ................................................................................................... 26

Power Consumption ............................................................................... 27

Propagation Delay ................................................................................. 27

Temperature .......................................................................................... 27

Start-Up Time......................................................................................... 27

Index

Keywords .............................................................................................. 29

DVSD / DVSE6800+ Installation and Operation Manual vii

Preface

Manual Information

Purpose

This manual details the features, installation procedures, operational

procedures, and specifications of the DVSD / DVSE6800+ dual

SDI / ASI video distribution amplifier.

Audience

This manual is written for engineers, technicians and operators

responsible for the installation, setup, and / or operation of the

DVSD / DVSE6800+ dual SDI / ASI video distribution amplifier.

Revision History

Table P-1. Manual Revision History

Edition Date Revision History

A September 2005 Initial release

B September 2005

• Added information concerning

6800 / 7000 frames

• Updated information in “Maximum

6800+ Frame Power Ratings” section

• Added note concerning unused input

termination

C March 2006

• Removed information concerning

6800 / 7000 frame

• Added information concerning SDO1,

SDO2, and LOS

viii DVSD / DVSE6800+ Installation and Operation Manual

Preface

Writing Conventions

To enhance your understanding, the authors of this manual have

adhered to the following text conventions:

Obtaining Leitch Documents

Leitch documents can be viewed or downloaded from the Leitch

Web site at www.leitch.com

(go to Support>Documentation).

Alternatively, contact your Leitch customer service representative to

request a document.

Table P-2. Manual Style and Writing Conventions

Term or

Convention

Description

Bold Indicates dialog boxes, property sheets, fields, buttons,

check boxes, list boxes, combo boxes, menus, submenus,

windows, lists, and selection names.

Italics Indicates email addresses, the names of books or

publications, and the first instances of new terms and

specialized words that need emphasis.

CAPS Indicates a specific key on the keyboard, such as ENTER,

TAB, CTRL, ALT, or DELETE.

Code

Indicates variables or command-line entries, such as a

DOS entry or something you type into a field.

> Indicates the direction of navigation through a hierarchy

of menus and windows.

hyperlink Indicates a jump to another location within the electronic

document or elsewhere

Internet address

Indicates a jump to a Web site or URL

Note

Indicates important information that helps to avoid and

troubleshoot problems.

DVSD / DVSE6800+ Installation and Operation Manual ix

Preface

Unpacking / Shipping Information

Leitch has carefully inspected, tested, and calibrated this product before

shipment to ensure years of stable and trouble free service.

1. Check equipment for any visible damage that may have occurred

during transit.

2. Confirm that you have received all items listed on the packing list.

3. Contact your Leitch dealer if any item on the packing list is

missing.

4. Contact the carrier if any item is damaged.

5. Remove all packaging material from the product and its associated

components before you install the unit.

Keep at least one set of original Leitch packaging, in the event that you

need to return a product for servicing. If the original packaging is not

available, you can purchase replacement packaging from Leitch at a

modest cost or supply your own packaging as long as it meets the

following criteria:

• Withstands the weight of the product

• Holds the product rigid within the packaging

• Leaves at least two inches of space between the product and the

container

• Protects the corners of the product

Ship products back to Leitch for servicing prepaid and, if possible, in

the original packaging material. If the product is still within the

warranty period, Leitch will return the product prepaid after servicing.

x DVSD / DVSE6800+ Installation and Operation Manual

Preface

Safety Standards and Compliances

See the 6800+ Safety Instructions and Standards Manual to find the

safety standards and compliances for this 6800+ series product. A

safety manual is shipped with every FR6802+ Frame Installation and

Operation Manual and can be downloaded from the Leitch Web site at

www.lei

tch.com. Alternatively, contact your Leitch customer service

representative for a copy of this safety manual.

Safety Terms and Symbols

This product manual uses the following safety terms and symbols to

identify certain conditions or practices. See the 6800+ Safety

Instructions and Standards Manual for more information.

Table P-3. Safety Terms and Symbols

WARNING: Identifies conditions or practices that can result in

personal injury or loss of life—high voltage is present.

Uninsulated dangerous voltage within the product’s enclosure

may be sufficient to constitute a risk of electric shock to persons.

CAUTION: Identifies conditions or practices that can result in

damage to the equipment or other property. Important operating

and maintenance (servicing) instructions are included in the

literature accompanying the product.

DVSD / DVSE6800+ Installation and Operation Manual xi

Preface

Restriction on Hazardous Substances (RoHS) Directive

Directive 2002 / 95 / EC—commonly known as the European Union

(EU) Restriction on Hazardous Substances (RoHS)—sets limits on the

use of certain substances found in electrical and electronic equipment.

The intent of this legislation is to reduce the amount of hazardous

chemicals that may leach out of landfill sites or otherwise contaminate

the environment during end-of-life recycling. The Directive takes effect

on July 1, 2006, and it refers to the following hazardous substances:

• Lead (Pb)

• Mercury (Hg)

• Cadmium (Cd)

• Hexavalent Chromium (Cr-V1)

• Polybrominated Biphenyls (PBB)

• Polybrominated Diphenyl Ethers (PBDE)

In accordance with this EU Directive, all Leitch Technology products

sold in the European Union will be fully RoHS-compliant and

“lead-free.” (See the Leitch Web site, www.leitch.com

, for more

information on dates and deadlines for compliance.) Spare parts

supplied for the repair and upgrade of equipment sold before

July 1, 2006 are exempt from the legislation. Leitch equipment that

complies with the EU directive will be marked with a RoHS-compliant

symbol, as shown in Figure P-1.

Figure P-1. RoHS Compliance Symbol

xii DVSD / DVSE6800+ Installation and Operation Manual

Preface

Waste from Electrical and Electronic Equipment

(WEEE) Directive

The European Union (EU) Directive 2002 / 96 / EC on Waste from

Electrical and Electronic Equipment (WEEE) deals with the collection,

treatment, recovery, and recycling of electrical and electronic waste

products. The objective of the WEEE Directive is to assign the

responsibility for the disposal of associated hazardous waste to either

the producers or users of these products. Effective August 13, 2005,

producers or users will be required to recycle electrical and electronic

equipment at end of its useful life, and must not dispose of the

equipment in landfills or by using other unapproved methods. (Some

EU member states may have different deadlines.)

In accordance with this EU Directive, Leitch Technology International,

Inc. and other companies selling electric or electronic devices in the EU

will affix labels indicating that such products must be properly

recycled. (See the Leitch Web site, www.leitch.com

, for more

information on dates and deadlines for compliance.) Contact your local

Leitch sales representative for information on returning these products

for recycling. Leitch equipment that complies with the EU directive will

be marked with a WEEE-compliant symbol, as shown in Figure P-2.

Figure P-2. WEEE Compliance Symbol

DVSD / DVSE6800+ Installation and Operation Manual 1

Chapter 1

Introduction

Overview

This chapter introduces the DVSD / DVSE6800+, and includes the

following topics:

• “Product Description” on page 2

• “Module Descriptions” on page 3

• “Signal Flow” on page 6

2 DVSD / DVSE6800+ Installation and Operation Manual

Chapter 1: Introduction

Product Description

The DVSD / DVSE6800+ dual distribution amplifiers provide two

channels of SD-ASI video distribution; the DVSE6800+ also provides

cable equalizing and reclocking. The DVSD / DVSE6800+ dual

distribution amplifiers provide four outputs for each input (two 1×4s),

and provide a method that allows for a single channel distribution

amplifier with 8 outputs (one 1×8). DVSD / DVSE6800+ dual

distribution amplifiers feature high video performance, low cost, and

remote indication of signal presence and alarms. They feature high

video performance, low cost, remote control, and diagnostic capability

in Leitch's control system.

• The DVSD6800+ can distribute any 10 – 540 Mb / s data within the

amplitude limitation.

• The DVSE6800+ can handle 143 Mb / s, 177 Mb / s, 270 Mb / s,

360 Mb / s and 540 Mb / s serial digital video signals; and SMPTE

310 and ASI signals.

You can set up, control, and monitor a DVSD / DVSE6800+ locally via

card-edge jumper or remotely on a PC. For remote control, you can use

either a serial RS-232 or optional ICE6800+ Ethernet connection.

Typical Broadcast and Production Applications

The DVSD / DVSE6800+ dual amplifier can be used in broadcast,

cable, production, educational, and auditorium applications where a low

cost method of distributing SDI / ASI video signals is required.

Main Features

DVSD / DVSE6800+

• Two inputs, four outputs per input (two 1×4s) or one input, eight

outputs (one 1×8)

• Identical polarity between input and outputs (ASI compliance)

• Automatic cable equalization

• Automatic bypass if the signal cannot be reclocked

• Manual (force ) bypass option

• Input signal presence detect

• Auto cable EQ

• Alarm output

DVSD / DVSE6800+ Installation and Operation Manual 3

Chapter 1: Introduction

DVSE6800+ Only

• Auto / manual reclock (19.4 / 143 / 177 / 270 / 360 / 540 Mb / s)

• Reclocking status report

• Auto bypass

Module Descriptions

Front Module

Figure 1-1 is a generic top-front view of a typical DVSD / DVSE6800+

module and shows the general location of standard LEDs, controls, and

jumpers. See page 23 for descriptions of the control and monitoring

LEDs. See page 16 for descriptions of the jumpers.

Figure 1-1. DVSD / DVSE6800+ Dual Distribution Amplifier Module

4 DVSD / DVSE6800+ Installation and Operation Manual

Chapter 1: Introduction

Back Modules

FR6802+ Frame Back Module

Figure 1-2 shows the double-width back connector module used by the

DVSD / DVSE6800+ when installed in an FR6802+ frame.

Figure 1-2. Back Module for FR6802+ Frame

Note

Distribution amplifiers with

unused inputs should have the

input terminated. Not doing so

may cause erroneous readings of

a valid input signal that can be

induced from adjacent slots.

DVSD / DVSE6800+ Installation and Operation Manual 5

Chapter 1: Introduction

Signal Input / Output Connections for FR6802+DM Frames

Figure 1-3 shows the signal input / output connections used by the

DVSD / DVSE6800+ when installed in an FR6802+DM frame.

Figure 1-3. Back Module for FR6802+DM Frame

Note

Distribution amplifiers with

unused inputs should have the

input terminated. Not doing so

may cause erroneous readings of

a valid input signal that can be

induced from adjacent slots.

6 DVSD / DVSE6800+ Installation and Operation Manual

Chapter 1: Introduction

Signal Flow

Figure 1-4. DVSD6800+ Signal Flow Diagram

DVSD / DVSE6800+ Installation and Operation Manual 7

Chapter 1: Introduction

Figure 1-5. DVSE6800+ Signal Flow Diagram

8 DVSD / DVSE6800+ Installation and Operation Manual

Chapter 1: Introduction

Page is loading ...

Harris DVSD6800+ Operating instructions

This manual is also suitable for

Harris DVSD6800+ Operating instructions

Related papers

Other documents