Harris HSE6800+ Operating instructions

Brand: Harris

Model: HSE6800+

Type: Operating instructions

This manual is also suitable for

HSD6800+

Harris HSE6800+ is a high quality SD/HD serial digital video distribution amplifier. It provides a cost-effective means to extend and distribute serial digital video signals. Ideal for broadcast and production applications such as studios, master control rooms, and satellite uplinks, the HSE6800+ offers key features like:

Automatic cable equalization up to 300m (984ft) on standard Belden 1694A coax (at 1.485 Gbps).
Supports all standard serial digital video formats, including ASI, SDI, HD-SDI, and DVB-ASI.
Input reclocking and output retimed to minimize jitter and provide a clean, reliable signal.

Automatic cable equalization up to 300m (984ft) on standard Belden 1694A coax (at 1.485 Gbps).
Supports all standard serial digital video formats, including ASI, SDI, HD-SDI, and DVB-ASI.
Input reclocking and output retimed to minimize jitter and provide a clean, reliable signal.

HSD/HSE6800+

SD/HD Serial Digital Video Distribution

Amplifiers

Installation and Operation Manual

Edition F

175-000191-00

Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.

HSD/HSE6800+

SD/HD Serial Digital Video Distribution

Amplifiers

Installation and Operation Manual

Edition F

January 2010

Information

publication supersedes all previous releases. Printed in Canada.

This product and related documentation are protected by copyright and are

distributed under licenses restricting their use, copying, distribution, and

decompilation. No part of this product or related documentation may be

reproduced in any form by any means without prior written authorization of Harris

Corporation and its licensors, if any.

This publication could include technical inaccuracies or typographical errors.

Changes are periodically added to the information herein; these changes will be

incorporated into new editions of the publication. Harris Corporation may make

improvements and/or changes in the product(s) and/or the program(s) described in

this publication at any time.

Warranty

Information

The limited warranty policy provides a complete description of your warranty

coverage, limitations, and exclusions, as well as procedures for obtaining warranty

service. To view the complete warranty, visit our website.

This publication is provided “as is” without warranty of any kind, either express or

implied, including, but not limited to, the implied warranties of merchantability,

fitness for a particular purpose, or non-infringement.

Contents

Preface

Manual Information .......................................................................................... vii

Revision History ..........................................................................................vii

Writing Conventions ................................................................................. viii

Obtaining Documents ............................................................................... viii

Unpacking/Shipping Information ........................................................................ix

Safety Standards and Compliances ......................................................................x

Safety Terms and Symbols ............................................................................x

Restriction on Hazardous Substances (RoHS) Directive ..................................x

Waste from Electrical and Electronic Equipment

(WEEE) Directive ..........................................................................................xi

Introduction

Product Description ............................................................................................ 2

Typical Broadcast and Production Applications ............................................ 2

Main Features ............................................................................................. 2

Module Descriptions .......................................................................................... 3

Front Module .............................................................................................. 3

Back Module ............................................................................................... 5

Signal Flow ........................................................................................................ 7

Installation

Maximum 6800+ Frame Power Ratings ............................................................ 10

Unpacking the Module .................................................................................... 11

Checking the Packing List .......................................................................... 11

Setting HSD6800+ Jumpers .............................................................................. 12

Setting HSE6800+ Jumpers .............................................................................. 13

Installing 6800+ Modules ................................................................................. 14

Installing HSD/HSE6800+ Modules ............................................................. 14

Removing HSD/HSE6800+ Modules ........................................................... 14

Making Connections......................................................................................... 14

Contents

Operation

Understanding Jumper Controls ....................................................................... 16

Local Control ............................................................................................. 16

Remote Control ......................................................................................... 18

Understanding Parameter Types ....................................................................... 19

Adjustable Parameters ............................................................................... 19

Read-Only Parameters ............................................................................... 19

Operating Notes ............................................................................................... 19

Setting Locally Accessible Parameters ............................................................... 20

Setting Remotely Controlled Parameters .......................................................... 21

Changing Parameter Settings ........................................................................... 22

Recalling Default Parameter Settings ......................................................... 22

Reading Software and Hardware Versions ................................................. 22

LEDs and Alarms .............................................................................................. 23

Alarms ...................................................................................................... 23

Module Status LED .................................................................................... 23

Other LED Descriptions .............................................................................. 23

Specifications

Inputs .............................................................................................................. 26

Outputs ............................................................................................................ 26

Power Consumption ........................................................................................ 27

Propagation Delay............................................................................................. 27

Temperature .................................................................................................... 27

Start-Up Time .................................................................................................. 27

Index

Keywords ......................................................................................................... 29

vii

Preface

This manual details features, installation and operational procedures, and

specifications of the HSD/HSE6800+ SD/HD serial digital video distribution

amplifiers.

Manual

Information

This manual is written for engineers, technicians and operators responsible for the

installation, setup, and/or operation of the HSD/HSE6800+ SD/HD serial digital

video distribution amplifiers.

Revision History

Table P-1 Manual Revision History

Edition Date Revision History

A November 2003

 Initial release

B December 2003

 Corrected Power specifications

 Updated Remotely Controlled

Parameters table

 Clarified input and output Return Loss

specifications

C August 2005

 Added information concerning

maximum 6800+ frame power ratings

 Added index

D January 2006

 Updated FR6802+ back connector

illustrations

 Moved “Troubleshooting” section to

FR6802+ Frame Installation and

Operation Manual

E September 2006

 Updated information concerning

jumper settings

F January 2010

 Removed reference to input

termination jumper

Preface

viii

Writing

Conventions

To enhance your understanding, the authors of this manual have adhered to the

following text conventions:

Obtaining

Documents

Technical documents can be viewed or downloaded from our website.

Alternatively, contact your Customer Service representative to request a document.

Table P-2 Manual Style and Writing Conventions

Term or

Convention

Description

Bold Indicates dialog boxes, property sheets, fields,

buttons, check boxes, list boxes, combo boxes,

menus, submenus, windows, lists, and selection

names.

Italics Indicates email addresses, the names of books or

publications, and the first instances of new terms and

specialized words that need emphasis.

CAPS Indicates a specific key on the keyboard, such as

ENTER, TAB, CTRL, ALT, or DELETE.

Code

Indicates variables or command-line entries, such as a

DOS entry or something you type into a field.

> Indicates the direction of navigation through a

hierarchy of menus and windows.

hyperlink Indicates a jump to another location within the

electronic document or elsewhere

Internet

address

Indicates a jump to a Web site or URL

NOTE:

Indicates important information that helps to avoid

and troubleshoot problems.

HSD/HSE6800+

Installation and Operation Manual

Unpacking/

Shipping

Information

This product was carefully inspected, tested, and calibrated before shipment to

ensure years of stable and trouble free service.

1 Check equipment for any visible damage that may have occurred during

transit.

2 Confirm that you have received all items listed on the packing list.

3 Contact your dealer if any item on the packing list is missing.

4 Contact the carrier if any item is damaged.

5 Remove all packaging material from the product and its associated

components before you install the unit.

Keep at least one set of original packaging, in the event that you need to return a

product for servicing. If the original packaging is not available, you can supply your

own packaging as long as it meets the following criteria:

 Withstands the weight of the product

 Holds the product rigid within the packaging

 Leaves at least two inches of space between the product and the container

 Protects the corners of the product

Ship products back to us for servicing prepaid and, if possible, in the original

packaging material. If the product is still within the warranty period, we will return

the product prepaid after servicing.

Preface

Safety

Standards

and

Compliances

See the 6800+ Safety Instructions and Standards Manual to find the safety

standards and compliances for this 6800+ series product. A safety manual is

shipped with every FR6802+ Frame Installation and Operation Manual and

can be downloaded from our website. Alternatively, contact your Customer Service

representative for a copy of this safety manual.

Safety Terms and

Symbols

This product manual uses the following safety terms and symbols to identify

certain conditions or practices. See the 6800+ Safety Instructions and

Standards Manual for more information.

Restriction on

Hazardous

Substances

(RoHS) Directive

Directive 2002/95/EC — commonly known as the European Union (EU) Restriction

on Hazardous Substances (RoHS) — sets limits on the use of certain substances

found in electrical and electronic equipment. The intent of this legislation is to

reduce the amount of hazardous chemicals that may leach out of landfill sites or

otherwise contaminate the environment during end-of-life recycling. The Directive,

which took effect on July 1, 2006, refers to the following hazardous substances:

 Lead (Pb)

 Mercury (Hg)

 Cadmium (Cd)

 Hexavalent Chromium (Cr-V1)

 Polybrominated Biphenyls (PBB)

 Polybrominated Diphenyl Ethers (PBDE)

In accordance with this EU Directive, products sold in the European Union will be

fully RoHS-compliant and “lead-free.” Spare parts supplied for the repair and

upgrade of equipment sold before July 1, 2006 are exempt from the legislation.

Equipment that complies with the EU directive will be marked with a

RoHS-compliant symbol, as shown in Figure P-1.

Table P-3 Safety Terms and Symbols

Symbol Description

WARNING: Identifies conditions or practices that can result in

personal injury or loss of life — high voltage is present.

Uninsulated dangerous voltage within the product’s enclosure

may be sufficient to constitute a risk of electric shock to

persons.

CAUTION: Identifies conditions or practices that can result in

damage to the equipment or other property. Important

operating and maintenance (servicing) instructions are

included in the literature accompanying the product.

HSD/HSE6800+

Installation and Operation Manual

Figure P-1 RoHS Compliance Symbol

Waste from

Electrical and

Electronic

Equipment

(WEEE) Directive

The European Union (EU) Directive 2002/96/EC on Waste from Electrical and

Electronic Equipment (WEEE) deals with the collection, treatment, recovery, and

recycling of electrical and electronic waste products. The objective of the WEEE

Directive is to assign the responsibility for the disposal of associated hazardous

waste to either the producers or users of these products. As of August 13, 2005,

producers or users are required to recycle electrical and electronic equipment at

end of its useful life, and must not dispose of the equipment in landfills or by using

other unapproved methods. (Some EU member states may have different

deadlines.)

In accordance with this EU Directive, companies selling electric or electronic devices

in the EU will affix labels indicating that such products must be properly recycled.

Contact your local Sales representative for information on returning these products

for recycling. Equipment that complies with the EU directive will be marked with a

WEEE-compliant symbol, as shown in Figure P-2.

Figure P-2 WEEE Compliance Symbol

Preface

xii

Introduction

The HSD/HSE6800+ are SD/HD serial digital video distribution amplifiers. The

following topics are described in this chapter:

 Main Features on page 2

 Module Descriptions on page 3

 Product Description on page 2

 Signal Flow on page 7

Chapter 1

Introduction

Product

Description

HSD6800+ and HSE6800+ are SD/HD serial digital video distribution amplifiers in

the 6800+ family:

 The HSD6800+ is an SD/HD serial digital video distribution amplifier with cable

equalizing.

 The HSE6800+ is an SD/HD serial digital video distribution amplifier with cable

equalizing and reclocking.

Both distribution amplifiers feature high video performance, low cost, remote

control, and diagnostic capability in our control system.

You can set up, control, and monitor the HSD/HSE6800+ either locally via a

card-edge jumper or remotely on a PC. For remote control, you can use either a

serial RS-232 or optional ICE6800+ Ethernet connection.

Typical Broadcast

and Production

Applications

The HSD/HSE6800+ distribution amplifier can be used in broadcast, cable,

production, educational, and auditorium applications where a low cost method of

distributing serial digital video signals is required.

Main Features

Other HSD/HSE6800+ features include the following:

 One input, eight outputs for the dual slot back module; or one input, four

outputs for the single slot back module

 Input signal presence detect

 Automatic cable equalization

 Alarm output

 Automatic/manual reclock rate setting at 143 Mb/s, 177 Mb/s (manual only),

270 Mb/s SDI and ASI, 360 Mb/s, 540 Mb/s; and 1.485 Gb/s (HSE6800+ only)

 Reclocking status report (HSE6800+ only)

 Automatic/enforced bypass (HSE6800+ only)

HSD/HSE6800+

Installation and Operation Manual

Module

Descriptions

Front Module

Figure 1-1 is a generic top-front view of a typical HSD6800+ front module. See

Figure 2-1 on page 12 for jumper locations.

Figure 1-1. Typical HSD6800+ Front Module

Figure 1-2 is a generic top-front view of a typical HSE6800+ front module. See

Figure 2-3 on page 13 for jumper locations.

Figure 1-2. Typical HSE6800+ Front Module

Chapter 1

Introduction

LEDs, Switches, and Jumpers

Each 6800+ module has a number of LEDs assigned to indicated varying states/

functions. Table 1-1 briefly describes generic 6800+ LEDs, switches, and jumpers.

For HSD/HSE6800+ modules, module-specific functions are listed in Table 3-5 on

page 23. See Chapter 3, Operation for more information on specific HSD/

HSE6800+ module controls, LEDs, and jumpers.

Table 1-1 Generic 6800+ Module Features

Feature Description

Module status

LEDs

Various color and lighting combinations of these LEDs indicate

the module state. See Table 3-4 on page 23 for more

information.

Control LEDs Various lighting combinations of these control LEDs

(sometimes referred to as “Bank Select LEDs”) indicate the

currently selected bank. (This item not available on the HSD/

HSE6800+)

Monitoring

LEDs

Each 6800+ module has a number of LEDs assigned to

indicate varying states/functions.

Local/remote

control jumper

 Local: Locks out external control panels and allows

card-edge control only; limits the functionality of remote

software applications to monitoring

 Remote: Allows remote or local (card-edge) configuration,

operation, and monitoring of the HSD/HSE6800+

HSD/HSE6800+

Installation and Operation Manual

Back Module

FR6802+ Frame Back Module

NOTE: The HSD/HSE6800+ cannot be installed in a 6800/7000 series

frame.

Figure 1-3 shows the single-width back connector and Figure 1-4 shows the

double-slot back connector used by the HSD/HSE6800+ when installed in an

FR6802+ frame.

Figure 1-3 Single-Width Back Connectors for FR6802+ Frame

Figure 1-4 Double-Width Back Connectors for FR6802+ Frame

Chapter 1

Introduction

Signal Input/Output Connections for FR6802+DM Frames

Figure 1-5 shows the signal input/output connections used by the HSD/HSE6800+

when installed in an FR6802+DM frame.

Figure 1-5 Double-Slot Back Module for FR6802+DM Frames

HSD/HSE6800+

Installation and Operation Manual

Signal Flow

Figure 1-6. HSD/HSE6800+ Signal Flow Diagram

Chapter 1

Introduction

Page is loading ...

Harris HSE6800+ Operating instructions

Brand: Harris

Model: HSE6800+

Type: Operating instructions

This manual is also suitable for

HSD6800+

Automatic cable equalization up to 300m (984ft) on standard Belden 1694A coax (at 1.485 Gbps).
Supports all standard serial digital video formats, including ASI, SDI, HD-SDI, and DVB-ASI.
Input reclocking and output retimed to minimize jitter and provide a clean, reliable signal.

Download PDF

report

Harris HSE6800+ Operating instructions

This manual is also suitable for

Harris HSE6800+ Operating instructions

Related papers

Other documents