Harris DHSD6800+ Operating instructions

Type
Operating instructions

This manual is also suitable for

Edition B
175-000267-00
DHSD / DHSE6800+
Dual HD / SD Serial Digital Video
Distribution Amplifiers
Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
DHSD / DHSE6800+
Dual HD / SD Serial Digital
Video Distribution Amplifiers
Installation and Operation
Manual
Edition B
March 2006
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Trademarks and Copyrights
CCS, CCS CoPilot, CCS Navigator, CCS Pilot, Command Control
System, CineTone, CinePhase, CineSound, DigiBus, DigiPeek, Digital
Glue, DigiWorks, DTV Glue, EventWORKS, EZ HD, Genesis, HDTV
Glue, Image Q, Inca, Inca Station, InfoCaster, Inscriber, Inscriber CG—
FX, Icon, IconLogo, IconMaster, IconMaster Nav, IconSet, IconStation,
Integrator, LeFont, Leitch, LogoMotion, MediaFile, MIX BOX, NEO,
the NEO design, NEOSCOPE, NewsFlash, Nexio, Opus, Panacea,
PanelMAPPER, Platinum, Portal, PROM-Slide, RouterMAPPER,
RouterWORKS, Signal Quality Manager, SpyderWeb, SuiteView,
TitleMotion, UNIFRAME, Velocity, VelocityHD, VideoCarte,
Videotek, and X75 are trademarks of Leitch Technology International
Inc. which may be registered in the United States, Canada, and / or other
countries. All other trademarks are the property of their respective
owners.
Copyright 2006, Harris Corp. All rights reserved. This publication
supersedes all previous releases. Printed in Canada.
Warranty Information
The Leitch Limited Warranty Policy provides a complete description of
your warranty coverage, limitations, and exclusions, as well as
procedures for obtaining warranty service. To view the complete
warranty, visit www.leitch.com>Support>Warranties
.
DHSD / DHSE6800+ Installation and Operation Manual v
Contents
Preface
Manual Information .............................................................................. vii
Purpose ........................................................................................... vii
Audience ........................................................................................ vii
Revision History ............................................................................ vii
Writing Conventions ..................................................................... viii
Obtaining Leitch Documents ........................................................ viii
Unpacking / Shipping Information .......................................................... ix
Safety Standards and Compliances ..........................................................x
Safety Terms and Symbols ...............................................................x
Restriction on Hazardous Substances (RoHS) Directive ................ xi
Waste from Electrical and Electronic Equipment
(WEEE) Directive .......................................................................... xii
Chapter 1: Introduction
Overview...................................................................................................1
Product Description ..................................................................................2
Typical Broadcast and Production Applications ..............................2
Main Features ...................................................................................2
Module Descriptions ................................................................................4
Front Module ....................................................................................4
Back Modules ...................................................................................6
Signal Flow ..............................................................................................8
Chapter 2: Installation
Overview.................................................................................................11
Maximum 6800+ Frame Power Ratings ................................................12
Unpacking the Module ...........................................................................13
vi DHSD / DHSE6800+ Installation and Operation Manual
Contents
Preparing for Installation ............................................................... 13
Checking the Packing List ............................................................. 13
Setting Jumpers ..................................................................................... 14
Installing 6800+ Modules ..................................................................... 17
Required Frames and Back Module Connector Types .................. 17
Installing DHSD / DHSE6800+ Modules ....................................... 17
Removing DHSD / DHSE6800+ Modules ..................................... 17
Making Connections .............................................................................. 17
Chapter 3: Operation
Overview ................................................................................................ 19
Understanding Jumper Controls ............................................................ 20
Introducing Jumper Control Types ................................................ 20
P1 Jumpers ..................................................................................... 20
P2 / P3 Jumpers ............................................................................... 21
Understanding Parameter Types ............................................................ 23
Adjustable Parameters .................................................................... 23
Read-Only Parameters ................................................................... 24
Operating Notes...................................................................................... 24
Setting Remotely Controlled Parameters .............................................. 25
Changing Parameter Settings ................................................................. 27
Recalling Default Parameter Settings ............................................ 27
Reading the Software Version ....................................................... 27
Reading the Hardware Version ...................................................... 27
LEDs and Alarms .................................................................................. 28
Module Status Indicator LED ........................................................ 28
Alarms ............................................................................................ 29
Other LED Descriptions ................................................................. 29
Chapter 4: Specifications
Overview ................................................................................................ 31
Inputs ..................................................................................................... 32
Outputs ................................................................................................... 32
Power Consumption ............................................................................... 33
Propagation Delay .................................................................................. 33
Temperature .......................................................................................... 33
Start-Up Time ........................................................................................ 33
Index
Keywords .............................................................................................. 35
DHSD / DHSE6800+ Installation and Operation Manual vii
Preface
Manual Information
Purpose
This manual details the features, installation procedures, operational
procedures, and specifications of the DHSD / DHSE6800+ dual HD / SD
serial digital video distribution amplifiers.
Audience
This manual is written for engineers, technicians and operators
responsible for the installation, setup, and / or operation of the
DHSD / DHSE6800+ dual HD / SD serial digital video distribution
amplifiers.
Revision History
Table P-1. Manual Revision History
Edition Date Revision History
A February 2006 Initial release
B March 2006
Added information concerning output
configuration
Added information concerning loss of
signal
viii DHSD / DHSE6800+ Installation and Operation Manual
Preface
Writing Conventions
To enhance your understanding, the authors of this manual have
adhered to the following text conventions:
Obtaining Leitch Documents
Leitch documents can be viewed or downloaded from the Leitch
Web site at www.leitch.com
(go to Support>Documentation).
Alternatively, contact your Leitch customer service representative to
request a document.
Table P-2. Manual Style and Writing Conventions
Term or
Convention
Description
Bold Indicates dialog boxes, property sheets, fields, buttons,
check boxes, list boxes, combo boxes, menus, submenus,
windows, lists, and selection names.
Italics Indicates email addresses, the names of books or
publications, and the first instances of new terms and
specialized words that need emphasis.
CAPS Indicates a specific key on the keyboard, such as ENTER,
TAB, CTRL, ALT, or DELETE.
Code
Indicates variables or command-line entries, such as a
DOS entry or something you type into a field.
> Indicates the direction of navigation through a hierarchy
of menus and windows.
hyperlink Indicates a jump to another location within the electronic
document or elsewhere
Internet address
Indicates a jump to a Web site or URL
Note
Indicates important information that helps to avoid and
troubleshoot problems.
DHSD / DHSE6800+ Installation and Operation Manual ix
Preface
Unpacking / Shipping Information
Leitch has carefully inspected, tested, and calibrated this product before
shipment to ensure years of stable and trouble free service.
1. Check equipment for any visible damage that may have occurred
during transit.
2. Confirm that you have received all items listed on the packing list.
3. Contact your Leitch dealer if any item on the packing list is
missing.
4. Contact the carrier if any item is damaged.
5. Remove all packaging material from the product and its associated
components before you install the unit.
Keep at least one set of original Leitch packaging, in the event that you
need to return a product for servicing. If the original packaging is not
available, you can purchase replacement packaging from Leitch at a
modest cost or supply your own packaging as long as it meets the
following criteria:
Withstands the weight of the product
Holds the product rigid within the packaging
Leaves at least two inches of space between the product and the
container
Protects the corners of the product
Ship products back to Leitch for servicing prepaid and, if possible, in
the original packaging material. If the product is still within the
warranty period, Leitch will return the product prepaid after servicing.
x DHSD / DHSE6800+ Installation and Operation Manual
Preface
Safety Standards and Compliances
See the 6800+ Safety Instructions and Standards Manual to find the
safety standards and compliances for this 6800+ series product. A
safety manual is shipped with every FR6802+ Frame Installation and
Operation Manual and can be downloaded from the Leitch Web site at
www.lei
tch.com. Alternatively, contact your Leitch customer service
representative for a copy of this safety manual.
Safety Terms and Symbols
This product manual uses the following safety terms and symbols to
identify certain conditions or practices. See the 6800+ Safety
Instructions and Standards Manual for more information.
Table P-3. Safety Terms and Symbols
WARNING: Identifies conditions or practices that can result in
personal injury or loss of life—high voltage is present.
Uninsulated dangerous voltage within the product’s enclosure
may be sufficient to constitute a risk of electric shock to persons.
CAUTION: Identifies conditions or practices that can result in
damage to the equipment or other property. Important operating
and maintenance (servicing) instructions are included in the
literature accompanying the product.
DHSD / DHSE6800+ Installation and Operation Manual xi
Preface
Restriction on Hazardous Substances (RoHS) Directive
Directive 2002 / 95 / EC—commonly known as the European Union
(EU) Restriction on Hazardous Substances (RoHS)—sets limits on the
use of certain substances found in electrical and electronic equipment.
The intent of this legislation is to reduce the amount of hazardous
chemicals that may leach out of landfill sites or otherwise contaminate
the environment during end-of-life recycling. The Directive takes effect
on July 1, 2006, and it refers to the following hazardous substances:
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent Chromium (Cr-V1)
Polybrominated Biphenyls (PBB)
Polybrominated Diphenyl Ethers (PBDE)
In accordance with this EU Directive, all Leitch Technology products
sold in the European Union will be fully RoHS-compliant and
“lead-free.” (See the Leitch Web site, www.leitch.com
, for more
information on dates and deadlines for compliance.) Spare parts
supplied for the repair and upgrade of equipment sold before
July 1, 2006 are exempt from the legislation. Leitch equipment that
complies with the EU directive will be marked with a RoHS-compliant
symbol, as shown in Figure P-1.
Figure P-1. RoHS Compliance Symbol
xii DHSD / DHSE6800+ Installation and Operation Manual
Preface
Waste from Electrical and Electronic Equipment
(WEEE) Directive
The European Union (EU) Directive 2002 / 96 / EC on Waste from
Electrical and Electronic Equipment (WEEE) deals with the collection,
treatment, recovery, and recycling of electrical and electronic waste
products. The objective of the WEEE Directive is to assign the
responsibility for the disposal of associated hazardous waste to either
the producers or users of these products. Effective August 13, 2005,
producers or users will be required to recycle electrical and electronic
equipment at end of its useful life, and must not dispose of the
equipment in landfills or by using other unapproved methods. (Some
EU member states may have different deadlines.)
In accordance with this EU Directive, Leitch Technology International,
Inc. and other companies selling electric or electronic devices in the EU
will affix labels indicating that such products must be properly
recycled. (See the Leitch Web site, www.leitch.com
, for more
information on dates and deadlines for compliance.) Contact your local
Leitch sales representative for information on returning these products
for recycling. Leitch equipment that complies with the EU directive will
be marked with a WEEE-compliant symbol, as shown in Figure P-2.
Figure P-2. WEEE Compliance Symbol
DHSD / DHSE6800+ Installation and Operation Manual 1
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 1
Introduction
Overview
The DHSD / DHSE6800+ are HD /SD dual serial digital video
distribution amplifiers. The following topics are described in this
chapter:
“Main Features” on page 2
“Module Descriptions” on page 4
“Product Description” on page 2
“Signal Flow” on page 8
2 DHSD / DHSE6800+ Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 1: Introduction
Product Description
The DHSD / DHSE6800+ HD / SD dual serial digital video distribution
amplifiers provide two channels of HD / SD-SDI video distribution with
cable equalizing (and reclocking on DHSE6800+ only).
The DHSD / DHSE6800+ dual distribution amplifier provide 4 outputs
for each input (two 1×4s), and provide a method that allows for a single
channel distribution amplifier with 8 outputs (one 1×8). Both
distribution amplifiers feature high video performance, low cost,
remote control, and diagnostic capability in Leitch’s control system.
You can set up, control, and monitor the DHSD / DHSE6800+ either
locally via a card-edge jumper or remotely on a PC. For remote control,
you can use either a serial RS-232 or optional ICE6800+ Ethernet
connection.
Typical Broadcast and Production Applications
DHSD / DHSE6800+ distribution amplifiers can be used in broadcast,
cable, production, educational, and auditorium applications where a low
cost method of distributing serial digital video signals is required.
Main Features
DHSD / DHSE6800+ Features
DHSD / DHSE6800+ features include the following:
Configurable as a 1×8 or as a dual 1×4 distribution amplifier
Automatic cable equalization on inputs
Identical polarity for ASI compliance
Automatic switching from input 1 to input 2, when a loss of signal
is detected on input 1 and Loss Of Signal switching is enabled
Feedback status reports input signals present
Card edge control by jumpers with LED feedback
Remote control with status and alarm
DHSD / DHSE6800+ Installation and Operation Manual 3
Chapter 1: Introduction
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
DHSE6800+ Features
Automatic / manual reclock rate setting at 143 Mb / s, 177 Mb / s
(manual only), 270 Mb / s SDI and ASI, 360 Mb / s, 540 Mb / s; and
1.485 Gb / s
Reclocking
Feedback status reports input signals locked
Automatic or forced rate detection
Automatic / enforced bypass
4 DHSD / DHSE6800+ Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 1: Introduction
Module Descriptions
Front Module
Figure 1-1 is a generic top-front view of a typical DHSD6800+ front
module.Figure 1-2 on page 5 is a generic top-front view of a typical
DHSE6800+ front module. See Figure 2-1 on page 14 for jumper and
LED locations.
Figure 1-1. Typical DHSD6800+ Front Module
DHSD / DHSE6800+ Installation and Operation Manual 5
Chapter 1: Introduction
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Figure 1-2. Typical DHSE6800+ Front Module
6 DHSD / DHSE6800+ Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 1: Introduction
Back Modules
DHSD / DHSE6800+ modules can be installed with double-width back
connectors in FR6802+ and FR6802+DM frames.
FR6802+ Frame Back Module
Figure 1-3 shows the double-width back connector module used by the
DHSD / DHSE6800+ when installed in an FR6802+ frame.
Figure 1-3. Back Module for FR6802+ Frame
Note
Distribution amplifiers with
unused inputs should have the
input terminated. Not doing so
may cause erroneous readings of
a valid input signal that can be
induced from adjacent slots.
SDI
IN
SDI OUT 1
1
1
2
2
4
3
SDI OUT 2
12
4
3
DHSD / DHSE6800+ Installation and Operation Manual 7
Chapter 1: Introduction
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Signal Input / Output Connections for FR6802+DM Frames
Figure 1-4 shows the signal input / output connections used by the
DHSD / DHSE6800+ when installed in an FR6802+DM frame.
Figure 1-4. Back Module for FR6802+DM Frame
Note
Distribution amplifiers with
unused inputs should have the
input terminated. Not doing so
may cause erroneous readings of
a valid input signal that can be
induced from adjacent slots.
SDI
IN
SDI OUT 1
1
1
2
2
4
3
SDI OUT 2
12
4
3
8 DHSD / DHSE6800+ Installation and Operation Manual
Preliminary—Contents are proprietary and confidential. Do not photocopy or distribute.
Chapter 1: Introduction
Signal Flow
Figure 1-5. Signal Flow Diagram for 1×8 Mode of Operation
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Harris DHSD6800+ Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI