POLYWOOD TD201SA Operating instructions

Type
Operating instructions

This manual is also suitable for

Attach arms to back leg assembly
Step 2
using (2) 2½" screws
Model: TD201
Attach back leg assembly to seat assembly
TOOLS NEEDED
using (4) 3" screws
__(2) Front leg with arm (LH/RH)
__(1) Back leg assembly
Step 1
__(1) Hardware pack
ALL HARDWARE IS COATED STAINLESS STEEL
__(2) Brace (LH/RH)
__(1) Foot rest
and foot rest with (8) 3" screws
Attach legs to the seat assembly
__(1) Seat assembly
Step 3
Attach braces between the front and back
legs with the remaining (4) 3" screws.
Note: Compound angle cut on brace
should be attached to the back leg
Qty. Description
11/30/2012
ASSEMBLY INSTRUCTIONS
B
B
B
B
B
RH
LH
B
B
COMPOUND ANGLE, LONG
EDGE ON THE BOTTOM
A
B
A
B
4MM T-HANDLE HEX KEY
(INCLUDED)
A - .27 X 2-1/2 SOCKET WAFER "A"
2
B - .27 X 3" SOCKET WAFER "A"
16
  • Page 1 1

POLYWOOD TD201SA Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI