2. POLYWOOD
  3. PWS137-1-MA
PWS137-1-MA

POLYWOOD PWS137-1-MA, PWS137-1-SR, PWS137-1-WH Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the POLYWOOD PWS137-1-MA Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
B-1/4 FLAT WASHER
6
A
B
C
6
C-1/4-20 NYLOCK NUT
- 7/16 wrench
- 4mm hex key, allen, t-handle
(incluided)
A-1/4-20 X 1-7/8 WAFER SHCS
6
9/25/2012
ASSEMBLY INSTRUCTIONS
__(1) Long leg assembly
Qty. Description
Model: SBO22
__(1) Hardware pack
TOOLS NEEDED
__(1) Short leg assembly
with (6) 1-7/8” bolts, nuts and washers
Step 1
Attach long leg assembly to short leg assembly
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
9/25/2012
ASSEMBLY INSTRUCTIONS
using (2) .27x2" screws
Qty. Description
Model: SBA15
8
TOOLS NEEDED
- 4mm T Handle Hex Key (included)
- 7/16 Wrench
6
Attach front legs to seat
using (6) 1-7/8" bolts, nuts
Step 2
Attach arms to front leg using
2
__(1) Hardware pack
__(1) Short brace
__(1) Long brace
__(2) Arms
__(2) Front legs
__(1) Back
using (2) .27x2" screws
Attach long brace
and washer
(2) 2-1/4" bolts, nuts and washer
__(1) Seat
Step 1
Step 3
Attach back to seat
using (2) .27x2" screws
Attach back to arm
8
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
A
B
B
Long brace
A
Wing faces
front
D,E
8
E-1/4-20 NYLOCK NUT
D-1/4 FLAT WASHER
C-1/4-20 X 2-1/4 WAFER SHCS
B-1/4-20 X 1-7/8 WAFER SHCS
A-.27 X 2 SOCKET WAFER A
Step 4
using (2) .27x2" screws
Attach short brace to rear leg
A
Short brace
A
A
A
A
A
C
D,E
/