TD101WH

POLYWOOD TD101WH Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the POLYWOOD TD101WH Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
TOOLS NEEDED
DescriptionQty.
Model: TD101
__(1) Hardware pack
Attach back leg assembly to seat assembly
(INCLUDED)
4mm HEX KEY, ALLEN, T-HANDLE
using (4) 3" screws
__(1) Front assembly
__(1) Back leg assembly
Step 2
__(1) Seat assembly
ALL HARDWARE IS COATED STAINLESS STEEL
__(2) Braces
__(1) Foot rest
Step 1
assembly and with (4) 3" screws
Attach front assembly to the seat
Step 3
Attach braces between the front and back
legs with the remaining (4) 3" screws.
Note:
Angle cut on brace
should be attached to the back leg
11/30/2012
ASSEMBLY INSTRUCTIONS
Angle cut with long edge
on bottom
.27 X 3 SOCKET WAFER A
12
/