POLYWOOD TD102GY Operating instructions

POLYWOOD
Brand
POLYWOOD
Model
TD102GY
Type
Operating instructions

This manual is also suitable for

4MM HEX KEY,ALLEN, T-HANDLE
(INCLUDED)
assembly and with (4) 3" screws
Step 2
__(1) Back leg assembly
__(2) Short brace
TOOLS NEEDED
Qty.
__(2) Long brace
ALL HARDWARE IS COATED STAINLESS STEEL
Attach front assembly to the seat
Model: TD102
__(1) Foot rest
Description
using (4) 3" screws
Attach back leg assembly to seat assembly
Step 1
__(1) Hardware pack
__(1) Seat assembly
__(1) Front assembly
Step 3
Attach braces between the front and back
legs with the remaining (8) 3" screws.
Note: Angle cut on brace
should be attached to the back leg
11/30/2012
ASSEMBLY INSTRUCTIONS
Long brace
Angle cut with long edge
on bottom (both braces)
15.13
16.25
16
A - .27 X 3 SOCKET WAFER A
  • Page 1 1

POLYWOOD TD102GY Operating instructions

POLYWOOD
Brand
POLYWOOD
Model
TD102GY
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents