angle
12° Straight angle cut
Compound
15 1/8"
16 1/4"
B
A
A
brace
Short
Long brace
A - .27 X 2 1/2 SOCKET WAFER "A"
2
4MM T-HANDLE HEX KEY
(INCLUDED)
B - .27 X 3 SOCKET WAFER "A"
20
__(2) Short brace (LH/RH)
Description
Qty.
ALL HARDWARE IS COATED STAINLESS STEEL
6/2/2011
TOOLS NEEDED
Attach arms to back leg assembly
using (2) 2½
" screws
Attach back leg assembly to seat assembly
using (4) 3" screws
__(2) Front leg with arm (LH/RH)
__(1) Back leg assembly
__(1) Hardware pack
Model: TXD202
__(2) Long brace(LH/RH)
Assembly Instructions
and footrest with (8) 3" screws
Attach legs to the seat assembly
Step 1
__(1) Foot rest
__(1) Seat assembly
Step 2
Step 3
Attach braces between the front and back
legs with the remaining (8) 3" screws.
Note: Compound angle cut on brace
should be attached to the back leg
Assembly Instructions
Description
(8) 2 1/2" screws.
Attach the leg assemblies to the table top using
Lay the table top on a flat surface.
Step 2
4
__(1) Hardware pack
Models:
Qty.
(4) 3" screws.
8
Step 3
Step 1
Set table upright and tighten all bolts
Attach feet to legs using
(4) 3 1/4" Chair bolts.
4mm HEX KEY: INCLUDED
6/2/2011
TOOLS NEEDED
Attach leg braces using
TXRRT248, TXRBT248
TXRT248, TXRCT248
__(1) Table top
__(4) Leg
__(2) Foot
__(2) Brace
ALL HARDWARE IS COATED STAINLESS STEEL
A - .27 X 2 1/2 SOCKET WAFER "A"
A
A
C
B
B
Removable table plug
included in table.
4
C - 1/4-20 X 3-1/4 WAFER SHCS
B - .27 X 3 SOCKET WAFER "A"
4MM T-HANDLE HEX KEY
(INCLUDED)
/
