Page is loading ...
9/27/2012
DescriptionQty.
Model: TXA15
6
2
Assembly Instructions
TOOLS NEEDED
8
ALL HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
__(1) Hardware pack
__(1) Seat
__(1) Back
__(2) Front legs
__(2) Arms
__(1) Long brace
__(1) Short brace
8
C-1/4-20 X 2-1/4 WAFER SHCS
B-1/4-20 X 1-7/8 WAFER SHCS
A-.27 X 2 SOCKET WAFER A
short brace
A
A
Step 4
Attach short brace to rear leg
using (2) 2" screws
A
A
A
using (2) 2" screws
Step 3
Attach back to seat
using (2) 2" screws
Attach back to arm
A
Attach arms to front leg using
C
Step 2
(2) 2-1/4" screws
D,E
long brace
Attach front legs to seat
using (6) 1-7/8" screws
Attach long brace
B
B
A
A
front
using (2) 2" screws
Step 1
wing faces
D,E
8
E-1/4-20 NYLOCK NUT
D-1/4 FLAT WASHER
4MM T-HANDLE HEX KEY
(INCLUDED)
Attach feet to legs using
)
the umbrella brace.
Attach the leg assemblies to the table top using
can be removed if necessary to fit
umbrella stand
TXRT236, TXRCT236
4
Step 1
(8) 2 1/2" screws.
Models:
Assembly Instructions
Qty.
Set table upright and tighten all bolts
(4) 2 1/2" Chair bolts (
fine thread
Description
__(1) Hardware pack
Step 2
Lay the table top on a flat surface.
Step 4
9/28/2012
TOOLS NEEDED
TXRRT236, TXRBT236
*Please note: umbrella support optional,
4mm HEX KEY: INCLUDED
Step 3
Attach leg braces using
(4) 3" screws
Attach umbrella brace to
the leg braces using (2) 3" screws.
Install 1 1/2" bolt into threaded insert on
__(1) Table top
__(4) Leg
__(2) Foot
__(2) Brace
__(1) Umbrella Brace
ALL HARDWARE IS COATED STAINLESS STEEL
D
D
D
D
Removable umbrella plug
included with table
A
4MM T-HANDLE HEX KEY
(INCLUDED)
)
1
(
fine thread
A - 1/4-20 X 1-1/2 WAFER SHCS
B - 1/4-20 X 2-1/2 WAFER SHCS
(
fine thread
)
B
C
C
C - .27 X 2 1/2 SOCKET WAFER "A"
8
D - .27 X 3 SOCKET WAFER "A"
6
/
