2. Noble House
  3. 67621
67621

Noble House 67621, 299080 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Noble House 67621 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
NO.
Picture QTY
D 1
E 1
F 4
Assembly Instructions
Caution : You must read this before you proceed.
Chair
CAUTION : This Chair is NOT a TOY.
Keep your child / children at bay during the assembly process.
Parts list
Description
Backrest
Chair Seat
Leg(with pre-attached leveller)
1 OF 5
④
11
⑤
11
⑥
11
⑨
1
Washer (8mm)
Spring Washer (8mm)
Hard ware
Assembly Preparation
Assembly Step
Overview
Nut (8mm)
Spanner
Before Beginning Assembly:
Leg(with pre-attached
leveller)(F)
2 OF 5
This Chair has multiple parts and may require up to 30 minutes to assemble. To
give you an overview of the Chair parts, the above picture is to help you put the
various parts into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
Unpack and place all parts on a clean, non-marring surface.
2.1) Insert Bolts on Backrest(D) into the Chair Seat(E) as pictured above.
2.2) Attach Backrest(D) to Chair Seat(E) using Washers(④), Spring Washers(⑤),
and Nuts(⑥) with Spanner(⑨).
Do not fully tighten the Nuts.
2.1
2.2
3 OF 5
Insert the Legs(F) onto the Bolts on the Chair Seat(E).
Attach Legs(F) to Chair Seat(E) using Washers(④), Spring Washers(⑤) and
Nuts(⑥) with Spanner(⑨).
Tighten all Nuts at all Joints fully in a sequential manner.
Stand the Chair up.
Adjust the Legs pre-installed Levellers, until the Chair is level with the ground.
Your Chair is now ready for use.
This Chair can only be used on a flat, level surface.
Adjust Pre-installed Levellers
height for balance
4 OF 5
5 OF 5
/