Noble House 239281 Operating instructions

239281
Brand
Noble House
Model
239281
Type
Operating instructions

This manual is also suitable for

Caution : You must read this before you proceed.
MISSISSIPPI BISTRO TABLE
CAUTION : This table is NOT a TOY.
Keep your child / children at bay in the process of assembly.
Assembly Preparation
Before Beginning Assembly:
Assembly Instructions
1 OF 4
NO. Picture QT
Y
A1
B3
C1
9
9
9
J1
Parts list
Descri
p
tion
Table top with pre-attached bolts
Table leg with pre-attached bolt and levelle
Central Round Support Ring
Hard ware
Washers(8mm)
Spring washers(8mm)
Nut(8mm)
Spanner
Assembly Step
H
Unpack and place all parts on a clean soft surface.
Lay the Table Top(A), facedown, onto a flat soft clean surface .
Loosely attach the Table Legs(B) to the the Table Top(A) using washers,Spring
washers,and Nuts(H) with the Spanner(J).
DO NOT OVER TIGHTEN.
2 OF 4
Loosely attach the Central Round Support Ring(C)to Table Legs(B) using
Washers,Spring washers, and Nuts(H) with the Spanner(J).
DO NOT OVER TIGHTEN.
Stand the table rightside up.
Adjust the Legs pre-installed Levellers until the table is level with the ground.
After the table is completely level, in a sequential manner, tighten up all the
bolts.
Your table is now ready for use.
3 OF 4
4 OF 4
Assembly Instructions
Caution : You must read this before you proceed.
MISSISSIPPI BISTRO CHAIR
CAUTION : This chair is NOT a TOY.
Keep your child / children at bay in the process of assembly.
Assembly Preparation
Before Beginning Assembly:
1 OF 4
NO.
Picture QTY
D4
E1
F1
10
10
10
J1
H
Unpack and place all parts on a clean soft surface.
Hard ware
Washers(8mm)
Spring washers(8mm)
Nuts(8mm)
Spanner
Assembly Step
Parts list
Description
Chair leg with pre-attached Leveller
Chair seat with pre-attached Bolts.
Backrest with pre-attached bolts.
2 OF 4
Stand the chair rightside up.
Adjust the pre-installed Levellers, until the chair is level with the ground.
Now, in a sequential manner, tighten all screws and bolts.
Your chair is now ready for use.
Attach the Backrest(F) to the the Chair Seat (E) by using Washers, Spring
washers, Nuts (H) with Spanner(J)
DO NOT OVERTIGHTEN.
Then, attach the Chair legs(D) to the Chair Seat(E)by using Washers, Spring
Washers and Nuts (H). with Spanner(J)
DO NOT OVERTIGHTEN.
3 OF 4
4 OF 4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Noble House 239281 Operating instructions

239281
Brand
Noble House
Model
239281
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents