Noble House 299080 Operating instructions

Brand: Noble House

Model: 299080

Type: Operating instructions

This manual is also suitable for

67621

NO.

Picture QTY

D 1

E 1

F 4

Assembly Instructions

Caution : You must read this before you proceed.

Chair

CAUTION : This Chair is NOT a TOY.

Keep your child / children at bay during the assembly process.

Parts list

Description

Backrest

Chair Seat

Leg(with pre-attached leveller)

1 OF 5

④

11

⑤

11

⑥

11

⑨

1

Washer (8mm)

Spring Washer (8mm)

Hard ware

Assembly Preparation

Assembly Step

Overview

Nut (8mm)

Spanner

Before Beginning Assembly:

Leg(with pre-attached

leveller)(F)

2 OF 5

This Chair has multiple parts and may require up to 30 minutes to assemble. To

give you an overview of the Chair parts, the above picture is to help you put the

various parts into perspective. Please read through the instructions below to

familiarise yourself with the parts and steps before assembly.

Unpack and place all parts on a clean, non-marring surface.

2.1) Insert Bolts on Backrest(D) into the Chair Seat(E) as pictured above.

2.2) Attach Backrest(D) to Chair Seat(E) using Washers(④), Spring Washers(⑤),

and Nuts(⑥) with Spanner(⑨).

Do not fully tighten the Nuts.

2.1

2.2

3 OF 5

Insert the Legs(F) onto the Bolts on the Chair Seat(E).

Attach Legs(F) to Chair Seat(E) using Washers(④), Spring Washers(⑤) and

Nuts(⑥) with Spanner(⑨).

Tighten all Nuts at all Joints fully in a sequential manner.

Stand the Chair up.

Adjust the Legs pre-installed Levellers, until the Chair is level with the ground.

Your Chair is now ready for use.

This Chair can only be used on a flat, level surface.

Adjust Pre-installed Levellers

height for balance

4 OF 5

5 OF 5

1
2
3
4
5

Noble House 299080 Operating instructions

Brand: Noble House

Model: 299080

Type: Operating instructions

This manual is also suitable for

67621

Download PDF

Related papers

Other documents