Remote Automation Solutions Bristol OpenEnterprise Allen-Bradley RDI is a tool used primarily to facilitate communication between Allen-Bradley PLC-5s and various interface cards and protocols that are supported by RSLinx. With this device, users can configure drivers to establish communication paths between the PLC and the RDI. The RDI is then able to access data from the PLC's memory and make it available to other applications or systems.
The Allen-Bradley RDI is highly customizable, allowing users to tailor its functionality to meet specific project requirements. This is achieved through the configuration of various tables within the OpenEnterprise Database. These tables define the communication parameters, polling schedules, and data mapping for each PLC device.
Remote Automation Solutions Bristol OpenEnterprise Allen-Bradley RDI is a tool used primarily to facilitate communication between Allen-Bradley PLC-5s and various interface cards and protocols that are supported by RSLinx. With this device, users can configure drivers to establish communication paths between the PLC and the RDI. The RDI is then able to access data from the PLC's memory and make it available to other applications or systems.
The Allen-Bradley RDI is highly customizable, allowing users to tailor its functionality to meet specific project requirements. This is achieved through the configuration of various tables within the OpenEnterprise Database. These tables define the communication parameters, polling schedules, and data mapping for each PLC device.
Remote Automation Solutions Bristol OpenEnterprise Allen-Bradley RDI is a tool used primarily to facilitate communication between Allen-Bradley PLC-5s and various interface cards and protocols that are supported by RSLinx. With this device, users can configure drivers to establish communication paths between the PLC and the RDI. The RDI is then able to access data from the PLC's memory and make it available to other applications or systems.
The Allen-Bradley RDI is highly customizable, allowing users to tailor its functionality to meet specific project requirements. This is achieved through the configuration of various tables within the OpenEnterprise Database. These tables define the communication parameters, polling schedules, and data mapping for each PLC device.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI