Rest Rite HD35920QN Installation guide

Type
Installation guide
PARTS AND HARDWARE LIST
A
(Continued on back)
A.
Headboard
(1 pc)
B.
Footboard
(1 pc)
C. Frame
(1 pc)
D.
Headboard Leg
(2 pcs)
Set the Frame (Part C) on its side and unfold it.
Insert the Headboard Legs (Part D) into the
Headboard (Part A). Brackets on the legs
should be facing the center of the bed.
STEP 1 STEP 2
ASSEMBLY INSTRUCTIONS
Platform Bed
Contains One (1) Bed and Hardware
IMPORTANT NOTE:
Carefully remove all the parts from the box. Arrange on a at
surface and verify you have all of the following parts and hardware.
Rotate the two legs (one at the head of the bed and one at the foot of the bed) until they lock into place. Note that these two
legs will be slightly o the oor to allow for uneven oors. Set the frame up with the legs resting on the oor.
Attach the Headboard (Part A) and the Footboard (Part B) to the Frame (Part C) by sliding the bolts on the ends of the frame into
the slots on the Headboard. Your Platform Bed is now completely set up and ready for use.
STEP 3
STEP 4
ASSEMBLY INSTRUCTIONS (CONTINUED)
A
  • Page 1 1
  • Page 2 2

Rest Rite HD35920QN Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI