2. Hanover
  3. HBEDLTDNTN-BLK-FL

Hanover HBEDLTDNTN-BLK-FL, HBEDLTDNTN-BRN-FL Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Hanover HBEDLTDNTN-BLK-FL Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
A. Headboard (1 pc) B. Footboard (1 pc)
E. Center Support (1 pc)
D. Wood Slat System (1 pc)
C. Siderail (2 pcs)
F. Center Leg
(3 pcs)
G. Corner Leg
(4 pcs)
Platform Bed
Contains One (1) Bed and Hardware
IMPORTANT NOTE:
Carefully remove all the parts from the box. Arrange on a at
surface and verify you have all of the following parts and hardware.
PARTS LIST
HARDWARE LIST
VIDEO
(Continued on back)
J. Hex Key (1 pc) K. Washer (4 pcs)I. Screw (9 pcs)H. Bolt (8 pcs)
TOOLS REQUIRED:
Phillips Screwdriver
C
SIZE: QN, DB
http://www.youtube.com/watch?v=f1aOHq3C5hg
Scan the QR code on your smart phone or device, or enter the link below
to watch a complete video of the easy assembly of the Platform Frame.
STEP 1
STEP 2
STEP 4
ASSEMBLY INSTRUCTIONS
STEP 3
C
Screw the Center Legs (Part F) into the Center Support
(Part E). Screw the Corner Legs (Part G) into the
Headboard (Part A) and Footboard (Part B) using one
Washer (Part K) for each Corner Leg.
Screw the bolts (Part H) half way into the Headboard and
Footboard. Hang the Siderails (Part C) from the bolts then
tighten the bolts using the hex key (Part J).
Insert the Center Support into the brackets on the Head-
board and Footboard.
Roll out the Wood Slat System (Part D) and secure it in
place with 9 screws (Part I) using the pre-drilled holes and
a phillips screwdriver.
/