Rest Rite HD2A449QN Operating instructions

Brand: Rest Rite

Model: HD2A449QN

Type: Operating instructions

A. Headboard (1 pc) B. Footboard (1 pc)

D. Center Support (1 pc)

E. Wood Slat System (1 pc)

C. Siderail (2 pcs)

F. Center Leg (3 pcs)

Platform Bed

Contains One (1) Bed and Hardware

IMPORTANT NOTE:

Carefully remove all the parts

from the box. Arrange on a at

surface and verify you have all

of the following parts and hardware.

PARTS LIST

HARDWARE LIST

(Continued on back)

K. Large Hex Key (1 pc)J. Small Hex Key (1 pc)H. Small Screw (2 pcs) I. Large Screw (9 pcs)G. Bolt (3 pcs)

TOOLS REQUIRED:

Phillips Screwdriver

A

SIZE: QN, DB

STEP 1

STEP 2

STEP 4

ASSEMBLY INSTRUCTIONS

STEP 3

A

Attach the Footboard (Part B) to the Side Rails (Part C) by

sliding the Side Rail attachment over the pre-installed

bolts on the Footboard. Attach the Headboard (Part A) to

the Side Rails (Part C) by sliding the Side Rail attachment

over the pre-installed bolts on the Headboard. Securely

tighten the bolts on the Headboard and Footboard using

Large Hex Key (Part K).

Screw the Center Legs (Part F) into the Center Rail (Part D)

using Bolts (Part G). Secure each Center Leg using Small Hex

Key (Part J).

Insert the Center Rail into the brackets on the Headboard

and Footboard. Secure the Center Rail in place with Small

Screw (Part H) using the pre-drilled holes and a Phillips

Screwdriver. Secure the Center Rail into both the Head-

board and the Footboard.

Roll out the Wood Slat System (Part E) with the strap facing

down and secure it in place with nine Large Screws (Part I)

using the pre-drilled holes and a Phillips Screwdriver.

K

I

H

J

G

K

1
2

Rest Rite HD2A449QN Operating instructions

Brand: Rest Rite

Model: HD2A449QN

Type: Operating instructions

Download PDF

Related papers

Other documents