2. PROAIM
  3. SC-01

PROAIM SC-01 User manual

  • Hello! I've reviewed the provided assembly manual for the Proaim Snaprig Universal Clamp with 5/8" Socket Fits 60mm Speed Rails/Scaffold Tubes (SC-01). This document outlines the setup and features of the clamp, including its versatile mounting options and capacity to grip up to 20kg. I'm ready to help with your questions about this device.
  • What is the weight capacity of the clamp?
    What kind of mounting options are available?
    What is special about clamp's jaws?
1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Snaprig Universal Clamp with 5/8" Socket Fits
60mm Speed Rails/Scaold Tubes (SC-01)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Proaim Snaprig Universal Clamp with 5/8" Socket
2
SnapRig Universal Clamp with 5/8” Socket Setup
• Loosen the knob of Universal clamp with 5/8”
Socket and open it as shown in the image.
Note: The Clamp is equipped with one 5/8"
socket, one 1/4″-20 and one 3/8″-16 female
threaded hole, making it possible to mount
mulple equipment in one clamp.
• Universal clamp can be mounted from the
boom side, thread is also provided in the
boom for this loosen the knob then aach
the universal clamp with 5/8” Socket to the
rod, (Not Included) then secure it.
NOTE: The Clamp’s jaws expand up to 2.36" and
easily grip gear weighing up to 20kg/44lb,
oering secure rigging with speed rail, scaold
poles, or even square tubes.
• Tighten the threaded knob of Universal clamp
then mount the 5/8” baby pin (Not Included)
onto the clamp matching the thread.
Feature: This clamp with socket features
arculang jaws that can grip any irregularly
odd-shaped object rmly.
• Mount the light (Not Included) onto the baby
pin then ghten the ratchet knob of the light
(Not Included) then make movements as per
your requirement as shown in the image.
Feature: The peak-and-valley design of the jaw
allows for mulple points of contact, assuring a
solid grasp every me, whether mounted on
round, square, or at objects.
NOTE: Universal Clamp with a 5/8" Socket is a
smart soluon for rigging your gear, such as a
camera, monitor, light, or other accessories,
onto unconvenonally-shaped plaorms.
3
YOUR PROAIM SNAPRIG UNIVERSAL CLAMP WITH 5/8" SOCKET FITS 60MM
SPEED RAILS/SCAFFOLD TUBES
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
/