PROAIM THT-MTCL-01 User manual

Type
User manual

PROAIM THT-MTCL-01 is a versatile camera support that can be used in a variety of configurations to meet your specific needs. It comes with three 9" scaffold legs and three 5" scaffold legs, which can be attached to the Mitchell mount plate in different ways to create different heights and angles. The clamps can be used to secure the legs in place, and the knobs can be tightened to ensure a secure fit.

Here are some of the possible use cases for the PROAIM THT-MTCL-01:

  • As a hi-hat for supporting a camera on a tripod
  • As a low-angle support for shooting from a low perspective
  • As a boom arm for extending the reach of your camera

PROAIM THT-MTCL-01 is a versatile camera support that can be used in a variety of configurations to meet your specific needs. It comes with three 9" scaffold legs and three 5" scaffold legs, which can be attached to the Mitchell mount plate in different ways to create different heights and angles. The clamps can be used to secure the legs in place, and the knobs can be tightened to ensure a secure fit.

Here are some of the possible use cases for the PROAIM THT-MTCL-01:

  • As a hi-hat for supporting a camera on a tripod
  • As a low-angle support for shooting from a low perspective
  • As a boom arm for extending the reach of your camera
1
Whats In Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Mitchell Cyrus Hi-Hat (Scaold Hi-Hat) Versatile
Camera Support (THT-MTCL-01)
Assem b l y M a n u a l
3 x 5" scaold Legs
3 x 9" scaold Legs
3 x Clamps
Mitchell Mount Plate
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
2
If, You Detach the legs
Loosen the knobs & Remove the 5scaffold
leg into the Mitchell mount plate.
Similarly loosen the knobs of clamp &
Remove it from their locaon as shown in the
image
Loosen the knobs and spread it on the oor.
Then ghten the knobs of Mitchell triohat
again to secure appropriately.
Mitchell Cyrus Hi-Hat Setup
NOTE: Be sure all knobs are tight before and after any adjustments.
Loosen the knobs & Remove the 5Scaffold
legs.
NOTE: You can Adjust the legs & Arms also by
loosening the provided knob.
3
YOUR PROAIM MITCHELL TRIOHAT VERSATILE CAMERA SUPPORT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period ofme,
we will repair it without charge for labor or parts. Warranty doesnt cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
  • Page 1 1
  • Page 2 2
  • Page 3 3

PROAIM THT-MTCL-01 User manual

Type
User manual

PROAIM THT-MTCL-01 is a versatile camera support that can be used in a variety of configurations to meet your specific needs. It comes with three 9" scaffold legs and three 5" scaffold legs, which can be attached to the Mitchell mount plate in different ways to create different heights and angles. The clamps can be used to secure the legs in place, and the knobs can be tightened to ensure a secure fit.

Here are some of the possible use cases for the PROAIM THT-MTCL-01:

  • As a hi-hat for supporting a camera on a tripod
  • As a low-angle support for shooting from a low perspective
  • As a boom arm for extending the reach of your camera

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI