1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Snaprig Universal Clamp with 3/8″-16 Threaded Stud-
Fits 60mm Speed Rails/Scaold Tubes (SC-02)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Proaim Snaprig Universal Clamp with 5/8" Socket
2
Snaprig Universal Clamp Setup
• Loosen the knob of universal clamp and open
it as shown in the image.
NOTE: This clamp has arculang jaws that can
grip any irregularly odd-shaped object rmly.
Feature: The jaw's peak-and-valley design
allows for mulple points of contact, ensuring a
secure grasp every me, whether mounted on
round, square, or at objects.
• Aach the universal clamp to the rod,
(Not Included) then secure it properly with
the help of the knob.
Feature: The Clamp’s jaws expand up to 2.36"
and easily grip gear weighing up to 20kg/66lb,
oering secure rigging with speed rail, scaold
poles, or even square tubes.
• Aach the Superball Camera Tripod Ball Head
(Not Included) to the universal clamp
matching the thread 3/8"-16 and secure
properly by turning round.
NOTE: The Clamp is equipped with one 3/8″-16
threaded stud, one 1/4″-20 and one 3/8″-16
female threaded hole, making it possible to
mount mulple equipment in one clamp.
• The Superball Camera Tripod Ball Head
(Not Included) with the help of the knob, do
the movement according to your requirement
then mount the camera (Not Included) on it
matching the thread of the ball head.
• Aer mounng the camera on the Superball
ball head, (Not Included) secure the camera
properly as shown in the picture.
• Aach the LCD arm (Not Included) with the
universal clamp and secure it properly.
3
YOUR PROAIM SNAPRIG UNIVERSAL CLAMP WITH 3/8″-16 THREADED
STUD FITS 60MM SPEED RAILS
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
• Secure the LCD by mounng it on the LCD
arm as shown in the images.
NOTE: Proaim SnapRig Universal Clamp is a
smart soluon for rigging your gear, such as a
camera, monitor, light, or other accessories,
onto unconvenonally-shaped plaorms.
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
-
1
-
2
-
3
