1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
SnapRig Mini Super Clamp | Fits 30mm
Speed Rails Tubes SC-03 (SC-03)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Proaim SnapRig Mini Super Clamp
2
SnapRig Mini Super Clamp Setup
• Loosen the knob of Mini Super clamp and
open it as shown in the image.
Note: The Clamp is equipped with a 3/8"
threaded stud, a 1/4-20, and a 3/8"-16 female
threads to securely mount your gear with the
payload of up to 10kg in one go.
• Mini Super clamp can be mounted on Apple
boxes (Not Included) ghten the knob to
secure it as shown.
NOTE: Its jaws expand up to 1.18," and it easily
fastens onto speed rails, scaold poles, or even
square tubes.
• Aach the LCD arm (Not Included) with the
Mini Super clamp and secure it properly.
• Secure the LCD (Not Included) by mounng it
on the LCD arm then ghten the screw as
shown in the images.
• LCD is Properly secured with LCD Arm
(Not Included).
Feature: peak-and-valley design of the jaw
allows for mulple-point contact, ensuring a
rm grasp around squared, round and at
objects.
Mini Super Clamp Mounted on Rod Setup
• Aach the mini super clamp to the rod
(Not Included) ghten the knob to secure it.
Feature: This clamp with socket features
arculang jaws that can rmly grip to any
irregularly shaped object.
3
YOUR PROAIM SNAPRIG MINI SUPER CLAMP FITS
30MM SPEED RAILS TUBES SC-03
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
• Mount the 5/8” baby pin (Not Included) onto
the clamp matching the thread. Then mount
the light (Not Included) onto the baby pin.
• Tighten the ratchet knob of the light
(Not Included) then make movements as per
your requirement as shown in the image.
Feature: Clamp oers a smart soluon for
securing your equipment, like cameras,
monitors, lights, or other add-ons., on
unconvenonally-shaped plaorms with utmost
ease.
-
1
-
2
-
3
